Road safety has emerged as a global concern, and bus stops are the major points of concern as they act as interfaces where pedestrians interact with transit vehicles. In order to achieve a safe and sustainable infrastructure at bus stops, it is necessary to assess safety level of bus stops and suggest safety improvement measures. The present work aims to investigate whether design and management deficiencies of bus stops have any effect on safety of passengers and pedestrians. It is also aimed to develop a pro-active approach for evaluating safety level of bus stops by identifying design and management deficiencies. The methodology includes (i) identification of unsafe acts and causal factors at bus stops, (ii) classification of causal factors under design and management deficiencies, (iii) estimation of weightage of causal factors, (iv) fuzzy evaluation of bus stops, (v) calculation of safety levels of bus stops, and (vi) validation of the methodology using crash data. While a combination of Fuzzy AHP and RIDIT analysis was used to estimate the weightage of causal factors, a fuzzy-scoring-based expert field investigation was carried out to assess design and management deficiencies of bus stops. The methodology was applied to evaluate the safety level of bus stops located along a major urban corridor in Kolkata, India.
1 August 2020 in Journal of Traffic and Transportation Engineering (English Edition)
Calibration is an essential prerequisite to scenario evaluations using traffic micro-simulation models (TMMs). In the context of mixed-traffic operations, where different fast and slow moving vehicular modes form a heterogeneous environment, a well-calibrated model needs to give adequate importance to each mode to realistically replicate the complex interactions in the traffic stream. This paper presents a methodology for calibrating TMMs for such mixed-traffic conditions. A combination of vehicle mode-specific travel time distributions is adopted as the performance measure for the calibration. To aid practitioners, each step of the methodology is demonstrated using a VISSIM simulator considering a signalized corridor in the Kolkata metro city, India. The work includes genetic algorithm (GA)-based optimization for obtaining mode-specific parameter sets. The Kolmogorov-Smirnov test is carried out to compare the travel time distributions of different modes. The calibrated model is also validated considering several signalized approaches along the calibrated study corridor. The results show that the methodology is successful in developing a model for non-lane based mixed-traffic operations with vehicle mode-specific optimized parameter sets.
17 March 2019 in Transportation Research Record: Journal of the Transportation Research Board
In mixed traffic streams, especially near the intersections, buses suffer significantly due to congestion and excessive delays compared with other modes as they operate on fixed routes. To increase the attractiveness of bus journeys by improving schedule-reliability and reducing journey times, it is necessary to give priority to buses by segregating them from the main traffic stream. However, the road space is generally constrained in the cities and dedicated bus lanes are not a feasible solution in the majority of urban centers. This paper aims to investigate the effectiveness of queue jump lanes (QJL) with and without pre-signal for non-priority traffic. The impacts on traffic and bus operations are analyzed based on implementations at two signalized approaches with distinct traffic and roadway characteristics in the Kolkata city, India. The field implementation indicated travel time savings to passengers as a whole with variations with respect to different scenarios. Impacts on travel time and vehicle discharge yielded the effective benefits of the bus priority implementation. It was also meaningful and interesting to investigate the impacts on driver behavior in terms of bus stop manuevres, and the social acceptability of such implementation. The changes in safety-related aspects and driver violations are some of the aspects which could not be directly investigated in an analytical or micro-simulation platform, but needed a field implementation. The experiences gained from the field implementation of bus priority with QJL are expected to encourage practitioners to apply similar treatments in other cities in emerging countries with analogous operating conditions.
13 July 2022 in IEEE Transactions on Intelligent Transportation Systems
What are the main factors related to road or service configuration influencing the response behaviour of connected vehicles? How does it evolve with respect to the Market Penetration Rate (MPR) of connected vehicles? Here are some questions raised by this paper with a focus made on Green Light Optimal Speed Advisory (GLOSA) strategy. Such a system, based on V2I communication, aims at providing speed advice/recommendations when approaching an intersection to adjust speed and enhance fuel consumption. The message is displayed on the Human Machine Interface (HMI) of the connected vehicles and a response is expected from the driver. This paper derives its interest in the response behaviour of the driver to HMI. It develops a two-stage methodology based on (i) Field Operational Test to collect realistic inputs (e.g., response rate, delay, deceleration profile, etc.) and (ii) a simulated environment used for extending the findings to non-observed cases (e.g. higher MPR). Besides, the methodology that is well-fitted for generic evaluation and comparison of pilots sites’ conclusions, one further contribution lies in the process to select the explaining factors. Factors are targeted among features of (i) the road configuration (e.g. number of lanes), (ii) the service configuration (e.g. activation distance), or (iii) the individual route choice and traffic conditions. Among others, it is highlighted that the activation distance plays a significant role in the response behaviour and, depending on the cycle duration, a short activation distance might be completely inefficient, while a true environmental impact requires high MPR.
1 September 2015 in Journal of Transport Literature