The structural mechanical properties and electronic properties of a new silicon allotrope Si96 are investigated at ambient pressure by using a first-principles calculation method with the ultrasoft pseudopotential scheme in the framework of generalized gradient approximation. The elastic constants and phonon calculations reveal that Si96 is mechanically and dynamically stable at ambient pressure. The conduction band minimum and valence band maximum of Si96 are at the R and G point, which indicates that Si96 is an indirect band gap semiconductor. The anisotropic calculations show that Si96 exhibits a smaller anisotropy than diamond Si in terms of Young’s modulus, the percentage of elastic anisotropy for bulk modulus and shear modulus, and the universal anisotropic index AU. Interestingly, most silicon allotropes exhibit brittle behavior, in contrast to the previously proposed ductile behavior. The void framework, low density, and nanotube structure make Si96 quite attractive for applications such as hydrogen storage and electronic devices that work at extreme conditions, and there are potential applications in Li-battery anode materials.
Based on density functional theory calculations, systematic calculations of the structural properties, elastic anisotropy and mechanical properties of boron alloying aluminum phosphide (BxAl1-xP) ternary mixed crystal have been presented. The results of the lattice parameters, band gaps, elastic constants and elastic modulus accord with the experimental and others published data well. The band structure which is described by CASTEP method indicates they are direct gap semiconductors for the composition x = 0.25, 0.50 and 0.75. Beyond that, we studied the Debye temperatures together with the acoustic velocities for all the BxAl1-xP alloys using the obtained elastic modulus. Finally, we depicted the three dimensional surface constructions to explain the elastic anisotropy using several calculated different anisotropic indexes in our work.
A multi-mesa InGaAs/InP avalanche photodiode (APD) with the advantage of the completely restricted electric field is proposed. The surface defects, which are the reasons for the sidewall leakage current generation in the mesa-structure APD, are theoretically studied, and then a sidewall leakage current model is developed. The Silvaco Atlas device simulation tool is used to analyze the generation mechanism of the sidewall leakage current, and the effects of different mesa structures on the sidewall leakage current of the APD are compared. The simulation results show that the sidewall leakage current of the multi-mesa APD is about zero and is not affected by the terrace size, which can be contributed by a very weak electric field at the sidewall.
Based on results from the Silvaco Atlas device simulation software, a separate absorption grading charge multiplication InGaAs/InP avalanche photodiode has been modeled. The Shockley–Read–Hall current, avalanche amplification current, trap-assisted tunneling current, and band-to-band direct tunneling current are combined and considered as the dark current. Individual components of the dark current have been obtained separately through numerical simulation. Due to the multiplication effect, the influence of the multiplication layer on the dark current components has been studied. The simulation results are analyzed based on semiconductor physics knowledge. The conclusions presented provide some theoretical guidance for the optimum design of avalanche photodiodes.
The effects of surface defects at the sidewall of absorption and multiplication layers on the sidewall leakage current in separate-absorption-charge-multiplication Ge/Si avalanche photodiodes with a mesa structure are investigated. It is found that high-density surface defects and a strong electric field at the sidewall are the reasons for the large sidewall leakage current. In addition, the influence of the width of the guard ring on the sidewall leakage current is also studied. It is found that increasing the width of the guard ring is beneficial to the reduction of the sidewall leakage current by reducing the sidewall electric field and the reduction is not significant when the guard-ring width is greater than 2 µm.