In order to obtain a reasonable extraction drilling method for coal seam working faces and to carry out targeted as well as cost-effective hole placement optimization, a gas–solid coupled model based on the coal rock deformation field and the matrix–fissure dual seepage–diffusion field was established and numerically solved via the use of COMSOL Multiphysics finite element software to optimize the gas transport parameters of the Dongpang coal mine based on the study of the coal seam gas transport law. This study shows the following: With an increase in the extraction time, the gas content of the coal seam was reduced to a minimum. It shows that, with an increase in the extraction time, the gas pressure and seepage velocity keep decreasing the stable value, the main stress around the borehole redistributes, and the coal permeability keeps decreasing with an increase in the decay coefficient. The extraction radius of the boreholes increases exponentially with the extraction time, and the reasonable extraction hole size is 94 mm; the use of multiple boreholes for pre-drawing gas via the use of the interval between the effective extraction radius and the influence radius results in a blind extraction zone caused by the superposition effect between the boreholes, and the residual gas value of the coal seam increases with an increase in the borehole spacing. The use of an equilateral triangular hole layout can avoid the extraction blind zone, and the pre-sumping effect is good after field application, which ensures the safe production of coal mines as well as the reasonable use of resources.

Due to the non-renewability of coal resources and the effect of excessive resource loss on the economic development of enterprises forming a constraint, breakthroughs in high energy consumption to achieve energy saving and emission reduction in coal mines represent an important way to promote the development of coal enterprises. This paper takes the energy-saving work of the Wuyang coal mine, which is very representative of China’s Shanxi Province, as an example, and uses hierarchical analysis to establish an assessment system for energy conservation and emission reduction in coal mines. We adopted on-site research, expert scoring, and project guidance to divide the factors affecting energy conservation and emission reduction in the Wuyang coal mine into 24 categories, and we then used fuzzy mathematical calculations to assess potential, which is of better practicability. The study shows that the grade of energy saving and emission reduction in the Wuyang coal mine is of a medium level, and the potential of energy saving and emission reduction is large. The main influencing factors are improving the recovery rate of refined coal, renovating pressurized filters, eliminating high-energy-consuming equipment, optimizing the parking process, replacing the flotation machine, and ensuring the intelligent management of power metering. According to the relevant factors derived from the energy-saving and emission reduction work at the Wuyang coal mine for implementing the relevant measures, we provide a reference for the work of energy saving and emission reduction in mines in order to promote the sustainable development of the coal mining industry.