With escalating demand for machinability, economical production, health, and environment-related aspects are pushing the present industrial units to drop the usage of harmful-cutting fluid in machining. However, the adaption of this approach for machining difficult-to-cut materials does not ensure favourable outcomes of the tool performance, surface qualities, etc., as friction and heat seriously disturb machining efficiency. This study is focused on near-dry machining employing recently developed hybrid nanofluids-based lubrication in the machining of AISI 52,100 steel. Hexagonal boron nitride (hBN) and silicon carbide (SiC) nanoparticles are added to the lubrication oil to enhance the performance of the Minimum Quantity Lubrication (MQL) system. Taguchi’s method-based Grey relational analysis (GRA) is used for the concurrent optimisation of the tool flank wear and surface roughness. The best parametric setting for the multi-response is achieved as: a lubricant flow rate of 150 ml/h, depth of cut of 0.2 mm, and nanofluid with 0.8 wt % of hBN and 0.2 wt % of SiC nanoparticles. The confirmation experimentation concluded that the multi-response factor is enhanced by 2.48% at the optimum setting with the mean values of TFW and SR as 84 and 0.36 µm, respectively.
18 October 2023 in International Journal on Interactive Design and Manufacturing (IJIDeM)
The main requirement of industries is to produce components at a fast rate of production while maintaining the required quality and cost. Therefore, industries are working on high speed and high rate of feed during machining which leads to high temperatures at the cutting area, which in return causes tool wear and a reduction in surface quality. To overcome this limitation, the cutting fluid in machining operations serves a crucial function of cooling both the Cutting tool and the surface of the workpiece. Additionally, it helps in the removal of chips from the heat-affected area. The excessive use of the cutting fluid and incorrect methods of disposing it can have detrimental effects on the environment and human health, while also increasing the overall cost of the process. The Minimum Quantity Cooling Lubrication (MQCL) strategy is essential in machining due to its utilization of less than 10% of the cutting fluid quantity compared to flood machining. This study provides a comprehensive analysis of the performance of MQCL in comparison to other machining environments, including flood machining and dry processing. The focus is on evaluating the tool performance and surface quality in various machining processes. The paper revealed that machining environments exert a significant impact on wear of tool and quality of surface. As evidenced by numerous studies, the MQCL strategy and nanoparticles based MQCL has consistently demonstrated superior results by minimizing wear of tool compared to alternative cooling and lubrication strategies.
10 January 2026 in International Journal of Information Technology