Darren Francis Kavanagh

Dr. Darren Francis Kavanagh


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2021 in Aerospace
Verified
Journal Article
Open access
PDF file
Dillon O’ReillyDillon O’Reilly
Dillon O’Reilly
Georg HerdrichGeorg Herdrich
Georg Herdrich
DKD. F. Kavanagh
D. F. Kavanagh
Over 2500 active satellites are in orbit as of October 2020, with an increase of ~1000 smallsats in the past two years. Since 2012, over 1700 smallsats have been launched into orbit. It is projected that by 2025, there will be 1000 smallsats launched per year. Currently, these satellites do not have sufficient delta v capabilities for missions beyond Earth orbit. They are confined to their pre-selected orbit and in most cases, they cannot avoid collisions. Propulsion systems on smallsats provide orbital manoeuvring, station keeping, collision avoidance and safer de-orbit strategies. In return, this enables longer duration, higher functionality missions beyond Earth orbit. This article has reviewed electrostatic, electrothermal and electromagnetic propulsion methods based on state of the art research and the current knowledge base. Performance metrics by which these space propulsion systems can be evaluated are presented. The article outlines some of the existing limitations and shortcomings of current electric propulsion thruster systems and technologies. Moreover, the discussion contributes to the discourse by identifying potential research avenues to improve and advance electric propulsion systems for smallsats. The article has placed emphasis on space propulsion systems that are electric and enable interplanetary missions, while alternative approaches to propulsion have also received attention in the text, including light sails and nuclear electric propulsion amongst others.

21 March 2016 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
MSMalgorzata Sumislawska
Malgorzata Sumislawska
Konstantinos N. GyftakisKonstantinos N. Gyftakis
Konstantinos N. Gyftakis
DKD. F. Kavanagh
D. F. Kavanagh
MMMalcolm D. McCulloch
Malcolm D. McCulloch
KBKeith J. Burnham
Keith J. Burnham
DHDavid A. Howey
David A. Howey
Interturn stator short circuits can develop quickly leading to serious damage of an electric machine. However, degradation mechanisms of winding insulation material are not yet fully understood. Therefore, the main contribution of this paper is the analysis of the impact of thermal ageing on the electrical properties of the thin-film winding insulation. The insulation samples have been aged thermally at 200 °C-275 °C and for 100-1600 h. After ageing, impedance spectroscopy measurements were undertaken on the samples and equivalent-circuit model (ECM) parameters fitted for each measurement. This allows the impact of thermal ageing on ECM parameters to be analyzed, giving insight into the changes in the electrical properties of the insulation. Finally, high voltage was applied to the samples aiming to identify the breakdown-voltage (BV) characteristics of the insulation material.

16 November 2012 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
PSPatricia Scanlon
Patricia Scanlon
DKD. F. Kavanagh
D. F. Kavanagh
FBFrancis M. Boland
Francis M. Boland
While automated condition monitoring of rotating machines often use vibration signals for defect detection, diagnosis, and residual life predictions, in this paper, the acoustic noise signal (<; 25 kHz), acquired via non-contact microphone sensors, is used to predict the remaining useful life (RUL). Modulation spectral (MS) analysis of acoustic signals has the potential to provide additional long-term information over more conventional short-term signal spectral components. However, the high dimensionality of MS features has been cited as a limitation to their applicability in this area in the literature. Therefore, in this study, a novel approach is proposed which employs an information theoretic approach to feature subset selection of modulation spectra features. This approach does not require information regarding the spectral location of defect frequencies to be known or pre-estimated and leverages information regarding the chronological order of data samples for dimensionality reduction. The results of this study show significant improvements for this proposed approach over the other commonly used spectral-based approaches for the task of predicting RUL by up to 19% relative over the standard envelope analysis approach used in the literature. A further 16% improvement was achieved by applying a more rigorous approach to labeling of acoustic samples acquired over the lifetime of the machines over a fixed length class labeling approach. A detailed misclassification analysis is provided to interpret the relative cost of system errors for the task of residual life predictions of rotating machines used in industrial applications.

27 October 2015 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
Konstantinos N. GyftakisKonstantinos N. Gyftakis
Konstantinos N. Gyftakis
MSMalgorzata Sumislawska
Malgorzata Sumislawska
DKD. F. Kavanagh
D. F. Kavanagh
DHDavid A. Howey
David A. Howey
MMMalcolm D. McCulloch
Malcolm D. McCulloch
The electric motor is the heart of the electric vehicle. It is crucial that any occurring faults are detected promptly so that a catastrophic failure is avoided. At the same time, deep knowledge of the degradation mechanisms is required to allow maximum performance at minimum cost. This paper focuses on this balance. Statistical results from measurements of unaged and accelerated aged winding insulation samples provide information about the degradation processes, enabling steps toward a reliable prognosis model of the motor's remaining life.

24 November 2020 in IEEE Transactions on Industry Applications
Verified
Journal Article
Open access
DKD. F. Kavanagh
D. F. Kavanagh
Konstantinos N. GyftakisKonstantinos N. Gyftakis
Konstantinos N. Gyftakis
Malcolm McCullochMalcolm McCulloch
Malcolm McCulloch
Polymer film insulation degradation is a major problem for electric machines which leads to short circuits, overheating, and eventually the occurrence of catastrophic failure. Electrical insulation materials provide the vital function of turn-to-turn, phase-to-phase, and phase-to-ground electrical isolation for the electromagnetic coils and windings. This article investigates the characterization of early-onset degradation of thin-film magnet wire insulation at elevated temperatures from 200 to 275 °C. Sample specimens were analyzed after ageing for 100 h in terms of their physical properties (surface roughness, mass), chemical properties [Fourier transform infrared (FTIR) spectroscopy], dielectric properties (capacitance and dissipation factor), and electrical properties (voltage breakdown strength and resistance). The results show that the specimen roughness and mass increase and decrease uniformly, respectively, with increased ageing temperature. Similar degradation results trends with respect to ageing temperature for the dielectric properties and electrical insulation strength is documented. The article also reports an extended ageing study which investigates early breakdown voltage on sample specimens over a much longer time duration, that of up to 1600 h.

20 April 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Eoghan Thomas ChelmiahEoghan Thomas Chelmiah
Eoghan Thomas Chelmiah
VMVioleta I. McLoone
Violeta I. McLoone
DKD. F. Kavanagh
D. F. Kavanagh
Bearings are one of the most common causes of failure for rotating electric machines. Intelligent condition-based monitoring (CbM) can be used to predict rolling element bearing fault modes using non-invasive and inexpensive sensing. Strategically placed accelerometers can acquire bearing vibration signals, which contain salient prognostic information regarding the state of health. Machine learning (ML) algorithms are currently being investigated to accurately predict the health of machines and equipment in real time. This is highly advantageous towards reducing unscheduled maintenance, increasing the operational lifetime, as well as mitigation of the associated health risks caused by catastrophic machine failure. Motivated by this, a robust CbM system is presented for rotating machines that is suitable for various industrial applications. Novel non-linear methods for both feature engineering (one-third octave bands) and wear-state modelling (exponential) are investigated. The paper compares two main types of feature extraction, which are derived from Short-Time Fourier Transform (STFT) and Envelope Analysis (EA). In addition, two types of supervised learning, Support Vector Machines (SVM) and k-Nearest Neighbour (k-NN) are explored. The work is tested and validated on the PRONOSTIA platform dataset, with remaining useful life (RUL) classification results of up to 74.3% and a mean absolute error of 0.08 achieved.