With the increase in global environmental pollution, it is important to understand the concentration characteristics and correlations with other pollutants of atmospheric particulate matter as affected by relevant policies. The data presented in this paper were obtained at monitoring stations in Xi’an, China, in the years from 2016 to 2020, and the spatial distribution characteristics of the mass and quantity concentrations of particulate matter in the atmosphere, as well as its correlation with other pollutants, were analyzed in depth. The results showed that the annual average concentrations of PM₁₀ and PM_2.5 decreased year by year from 2016 to 2020. The annual concentrations of PM_2.5 decreased by 20.3 μg/m³, and the annual concentrations of PM₁₀ decreased by 47.3 μg/m³. The days with concentrations of PM₁₀ exceeding the standards decreased by 82 days, with a decrease of 66.7%. The days with concentrations of PM_2.5 exceeding the standards decreased by 40 days, with a decrease of 35.4%. The concentration values of PM₁₀ and PM_2.5 were roughly consistent with the monthly and daily trends. The change in monthly concentrations was U-shaped, and the change in daily concentrations showed a double-peak behavior. The highest concentrations of particulate matter appeared at about 8:00~9:00 am and 11:00 pm, and they were greatly affected by human activity. The proportion of particles of 0~1.0 μm decreased by 1.94%, and the proportion of particles of 0~2.5 μm decreased by 2.00% from 2016 to 2020. A multivariate linear regression model to calculate the concentrations of the pollutants was established. This study provides a reference for the comprehensive analysis and control of air pollutants in Xi’an and even worldwide.

With the normalization of epidemic prevention and control, air filters are being used and replaced more frequently. How to efficiently utilize air filter materials and determining whether they have regenerative properties have become current research hotspots. This paper discusses the regeneration performance of reduced graphite oxide filter materials, which were studied in depth using water cleaning and the relevant parameters, including the cleaning times. The results showed that water cleaning was most effective using a 20 L/(s·m²) water flow velocity with a 17 s cleaning time. The filtration efficiency decreased as the number of cleanings increased. Compared to the blank group, the filter material’s PM₁₀ filtration efficiency decreased by 0.8%, 19.4%, 26.5%, and 32.4% after the first to fourth cleanings, respectively. The filter material’s PM_2.5 filtration efficiency increased by 12.5% after the first cleaning, and decreased by 12.9%, 17.6%, and 30.2% after the second to fourth cleanings, respectively. The filter material’s PM_1.0 filtration efficiency increased by 22.7% after the first cleaning, and decreased by 8.1%, 13.8%, and 24.5% after the second to fourth cleanings, respectively. Water cleaning mainly affected the filtration efficiency of particulates sized 0.3–2.5 μm. Reduced graphite oxide air filter materials could be water washed twice and maintain cleanliness equal to 90% of the original filter material. Water washing more than twice could not achieve the standard cleanliness equal to 85% of the original filter material. These data provide useful reference values for the evaluation of the filter materials’ regeneration performance.