A modified SliceGAN architecture was proposed to generate a high-quality synthetic three-dimensional (3D) microstructure image of TYPE 316L material manufactured through additive methods. The quality of the resulting 3D image was evaluated using an auto-correlation function, and it was discovered that maintaining a high resolution while doubling the training image size was crucial in creating a more realistic synthetic 3D image. To meet this requirement, modified 3D image generator and critic architecture was developed within the SliceGAN framework.

We performed a machine learning-aided analysis of the rolling and recrystallization textures in pure iron with different cold reduction ratios and cold-rolling directions. Five types of specimens with different cold reduction ratios and cold-rolling directions were prepared. The effect of two-way cold-rolling on the rolling texture was small at cold reduction ratios different from 60%. The cold reduction ratio in each stage hardly affected the texture evolution during cold-rolling and subsequent short-term annealing. In the case of long-term annealing, although abnormal grain growth occurred, the crystal orientation of the grains varied. Moreover, the direction of cold-rolling in each stage also hardly affected the texture evolution during cold-rolling and subsequent short-term annealing. During long-term annealing, sheets with the same cold-rolling direction in the as-received state and in the first stage showed the texture evolution of conventional one-way cold-rolled pure iron. Additionally, we conducted a machine learning-aided analysis of rolling and recrystallization textures. Using cold-rolling and annealing conditions as the input data and the degree of Goss orientation development as the output data, we constructed high-accuracy regression models using artificial neural networks and XGBoost. We also revealed that the annealing temperature is the dominant factor in the nucleation of Goss grains.