Developing an effective cleaner process technology for maize-cob biomass wastes is of utmost importance. This work involved the comparison of products yield (bio-oil, biogas, and biochar) from the fast, slow, and flash pyrolysis of maize-cob biomass wastes using a fixed-bed reactor; evaluation of the individual and combined influences of pyrolysis temperature, biomass particle size, and residence time on the yield of product, and the determination of the optimum pyrolysis conditions/products yield of fast pyrolyzed maize-cob. The fast pyrolysis was performed according to the Box-Behnken Design of Experiment with three variables and three levels of the response surface methodology. The bio-oil fuel properties were determined utilizing ASTM methods and chemically characterized using CHNS elemental analyzer, GC/MS, and FTIR. The performance of the three pyrolysis techniques in terms of their product yield is in the following order: Flash pyrolysis > Fast pyrolysis > Slow pyrolysis (for bio-oil); Slow pyrolysis > Fast pyrolysis > Flash pyrolysis (for biochar and biogas). An optimum bio-oil yield of 43.13% with a high heating value (HHV) of 30.59 MJ/kg, biochar yield of 37.18% with HHV of 20.41 MJ/kg, and biogas yield of 26.05% (HHV = 13.19 MJ/kg) was respectively obtained at an optimum temperature of 567.72, 463.71, and 593.17 °C; biomass particle size of 0.51, 3.83, and 2.58 mm; and residence time of 10.01, 15.28, and 18.92 min. The determined physicochemical characterized properties of the maize-cob-derived-bio-oil revealed that the bio-oil can potentially be valued as a biofuel and as a more promising feedstock for value-added chemical production.
1 January 2015 in Journal of Ecological Engineering
This work studies the biodegradation of spent engine oil in soil using Box-Behnken design under response surface methodology. NPK fertilizer (inorganic nutrient), Tween 80 (nonionic surfactant), and pig manure (organic nutrient) concentrations were used as independent biostimulant variables, while total petroleum hydrocarbon (TPH) and hexavalent chromium (Cr (VI)) reductions as dependent variables (response) in a 42-day remediation period. A statistically significant second-order quadratic regression model for TPH and Cr (VI) removal was obtained. The coefficient of determination (R 2 = 0.9995 for TPH and 0.9988 for Cr (VI)) and probability value (P < 0.0001) demonstrated significance for the regression model. Numerical optimization technique based on desirability function was carried out for initial spent engine oil concentration of 10% w/w to optimize the biodegradation process. The optimum values for biostimulation agents to achieve a predicted maximum TPH and Cr (VI) removal of 67.20% and 53.20%, respectively, were found to be as follows: NPK fertilizer, 4.22 g; Tween 80, 10.69 mg/l; and pig manure, 47.76 g. At this optimum point, the observed TPH and Cr (VI) reductions were found to be 66.47% and 52.33%, respectively. The statistical analyses and the closeness of the experimental results and model predictions show the reliability of the regression model, and thus, biostimulation of indigenous microbial density and activity can reduce remediation period of petroleum hydrocarbon and heavy metal-contaminated environment and subsequently the cost of remediation.
The continual generation and discharge of waste are currently considered two of the main environmental problems worldwide. There are several waste management options that can be applied, though anaerobic digestion (AD) process technology seems to be one of the best, most reliable, and feasible technological options that have attracted remarkable attention due to its benefits, including the generation of renewable energy in the form of biogas and biomethane. There is a large amount of literature available on AD; however, with the continuous, progressive, and innovative technological development and implementation, as well as the inclusion of increasingly complex systems, it is necessary to update current knowledge on AD process technologies, process variables and their role on AD performance, and the kinetic models that are most commonly used to describe the process-reaction kinetics. This paper, therefore, reviewed the AD process technologies for treating or processing organic biomass waste with regard to its classification, the mechanisms involved in the process, process variables that affect the performance, and the process kinetics. Gazing into the future, research studies on reduced MS-AD operational cost, integrated or hybrid AD-biorefinery technology, integrated or hybrid AD-thermochemical process, novel thermochemical reactor development, nutrient recovery from integrated AD-thermochemical process, and solid and liquid residual disposal techniques are more likely to receive increased attention for AD process technology of biomass wastes.
15 February 2015 in International Journal of Renewable Energy Development
This work investigated the effect of plantain peels as co-substrate in the anaerobic digestion of cow dung for efficient and high biogas production. The biogas experiments were carried out in two different 5 L anaerobic digesters and incubated for 40 days at ambient mesophilic temperatures (28 oC to 34 °C). The results showed that co-digestion of cow dung with plantain peels as co-substrate reduced start-up time for biogas generation and increased biogas yield by 18% as compared to cow dung alone. Peak biogas production was obtained for both digesters at pH of 6.7 and 6.9 as well as temperature of 29 and 30oC, respectively. Modelling study revealed that exponential plot simulated better in both ascending and descending limb than the linear plot the biogas production rates in biogas production from cow dung co-digested with plantain peels and cow dung alone, respectively. Logistic growth model and modified Gompertz plot showed better correlation of cumulative biogas production than exponential rise to maximum plot. These results show that biogas production can be enhanced efficiently through co-digestion process.