When considering the deployment of renewable energy sources in systems, the challenge of their utilization comes from their time instability when a mismatch between production and demand occurs. With the integration of thermal storages into systems that utilize renewable energy sources, such mismatch can be evened out. The use of phase-change materials (PCMs) as thermal storage has a theoretical advantage over the sensible one because of their high latent heat that is released or accumulated during the phase-change process. Therefore, the present paper is a review of latent thermal storages in hydronic systems for heating, cooling and domestic hot water in buildings. The work aims to offer an overview on applications of latent thermal storages coupled with heat pumps and solar collectors. The review shows that phase-change materials improve the release of heat from thermal storage and can supply heat or cold at a desired temperature level for longer time periods. The PCM review ends with the results from one of the Horizon2020 research projects, where indirect electrical storage in the form of thermal storage is considered. The review is a technological outline of the current state-of-the-art technology that could serve as a knowledge base for the practical implementation of latent thermal storages. The paper ends with an overview of energy storage maturity and the objectives from different roadmaps of European bodies.

This article presents the use of phase-change material (PCM) thermal storage within the Horizon 2020 HEART project (Holistic Energy and Architectural Retrofit Toolkit), aimed at decarbonising the European building sector through the retrofitting of existing structures into energy-efficient smart buildings. These buildings not only reduce energy consumption, but also incorporate advanced technologies for harnessing green energy, thereby promoting environmental sustainability. The HEART project employs state-of-the-art technologies for electricity production/dispatching and heat generation/storage, managed by a cloud-based platform for the real-time monitoring of parameters and optimising energy utilisation, enabling users to control their environmental comfort. The article provides a detailed examination of one of the project’s demonstration sites in Italy, focusing on various components such as heat pumps, photovoltaic systems (PV), controllers, and particularly emphasising the significance of storage tanks. The study involved the measurement and analysis of three heat storage tanks, each with a total volume of 3000 L. These tanks utilised PCM modules for latent heat storage, significantly enhancing overall heat accumulation. Water served as the heat transfer fluid within the tanks. Through meticulous calculations, the article quantifies the accumulated heat and presents a comparative evaluation between PCM-based storage tanks and conventional water tanks, showcasing the advantages of PCM technology in terms of increased heat retention and efficiency.