We have developed a 3-D high-resolution radar at 300 GHz with a cell resolution of 1×1.6×1.6 cm ³ at a standoff distance of 8 m for security applications. The selection of an operating frequency of 300 GHz, a bandwidth of 27 GHz, and a field of view of 50×90 cm ² improves the through-clothes imaging of person-borne concealed objects. The radar's antenna design allows single-pixel imaging at a frame rate of two frames per second. A reduction in cost and power consumption and improvements in image quality are additional requirements taken into account in the design of this radar system.

Current terahertz imagers rely on reflector systems for the beam quality and imaging speed because the cross-range span that the system can cover is limited by the beam aberrations when the antenna scans. We present the design of a Bifocal reflector system that can rapidly scan a terahertz beam for standoff imaging applications while increasing the field of view of previous designs up to 50%. The design is based in a confocal Gregorian system where the nominal reflector surfaces are substituted by shaped surfaces to reduce the beam aberrations, while not increasing the manufacture cost of the reflector antenna. We also provide a set of useful design formulas for the design of this kind of reflector systems. The beam patterns obtained by the proposed designs are numerically calculated with the commercial software GRASP and compared with those obtained with previous approaches to the same problem, showing the better performance of the proposed solution.

The aim of this work is to present the ICARA (induced-current analysis of reflector antennas) software, which is able to predict the behavior of reflector antennas using the physical optics method. The software offers different options for antenna configurations, single and array feed models, and far-field or aperture-field analysis.

This contribution describes the design of a multibeam parabolic reflectarray to produce two adjacent beams per feed in orthogonal Circular Polarization (CP) simultaneously at transmit (Tx) and receive (Rx) frequencies in Ka-band. The Variable Rotation Technique (VRT) has been applied to reflectarray cells based on two types of resonant elements, which makes it possible to provide orthogonal beams at Tx and Rx, as well as to implement an in-band optimization procedure to reduce the cross-polarization. A 90-cm parabolic reflectarray has been designed, manufactured and tested to produce multiple adjacent beams in RHCP and LHCP at both 20 and 30 GHz. The results are satisfactory and validate the concept of generating two spaced beams in orthogonal CP by a single feed, changing the polarization of the beam between Tx and Rx. This concept can be suitable for multispot satellites in Ka-band, enabling to halve the number of onboard antennas and feeds.