The polyacrylamide/gelatin–iron lanthanum oxide (P-G-ILO nanohybrid) was fabricated by the free radical grafting co-polymerization technique in the presence of N,N-methylenebisacrylamide (MBA) as cross linker and ammonium persulfate (APS) as initiator. The P-G-ILO nanohybrid was characterized by the various spectroscopic and microscopic techniques that provided the information regarding the crystalline behavior, surface area, and pore size. The response surface methodology was utilized for the statistical observation of diclofenac (DF) adsorption from the wastewater. The adsorption capacity (q_e, mg/g) of P-G-ILO nanohybrid was higher (254, 256, and 258 mg/g) than the ILO nanoparticle (239, 234, and 233 mg/g). The Freundlich isotherm model was the best fitted, as it gives the higher values of correlation coefficient (R² = 0.982, 0.991 and 0.981) and lower value of standard error of estimate (SEE = 6.30, 4.42 and 6.52), which suggested the multilayered adsorption of DF over the designed P-G-ILO nanohybrid and followed the pseudo second order kinetic model (PSO kinetic model) adsorption. The thermodynamic study reveals that adsorption was spontaneous and endothermic in nature and randomness onto the P-G-ILO nanohybrids surface increases after the DF adsorption. The mechanism of adsorption of DF demonstrated that the adsorption was mainly due to the electrostatic interaction, hydrogen bonding, and dipole interaction. P-G-ILO nanohybrid was reusable for up to five adsorption/desorption cycles.

Environmental pollution is the major issue of 21^st century. The toxic industrial effluents are crucially damaging aquatic environment, in the form of heavy metals, dyes and acids. The heavy metals are toxic, carcinogenic, non-degradable and therefore must be removed to save natural environment and human health. Batch sorption efficiency of Momordica Charantia L. stem and root (MCS and MCR) was studied for Cr(VI) metal ions removal under controlled adsorption parameters. The adsorbed and residual concentration of Cr(VI) was determined by atomic absorption spectrophotometer (AAS). The adsorbent surface morphology was determined by FTIR, BET, SEM and elemental analysis by EDX. The Freundlich and Langmuir equilibrium isotherm and pseudo 1st and 2nd order kinetic models were studied to understand bio-sorption mechanism. The Freundlich isotherm and pseudo 2nd order kinetic was best fitted model for MCS and MCR bio-sorption process. The maximum Langmuir adsorption capacity (q _max) was 312.50 and 400 (mg/g) for MCS and MCR respectively. The trend of removal efficiency (%) and metal uptake (q _e) was in order as MCS > MCR. All data was statistically analyzed using mean values ± standard deviation (SD). In conclusion, MCS and MCR are suggested as excellent sorbents for the elimination of numerous contaminants from the wastewater.

The present study deals with sonochemically in situ synthesis of a novel functional catalyst using hydrogen exfoliated graphene (HEG) supported titanium dioxide (TiO₂) and copper sulfate (CuSO₄) doped with zinc oxide (ZnO) (abbreviated as Ti/Cu/Zn-HEG). The synthesis of the Ti/Cu/Zn-HEG nanocomposite (NCs) catalyst was confirmed through its characterizations by XRD, SEM-EDX, TEM, XPS, FTIR, and BET methods. It was assessed for catalytic conversion of a model aromatic compound para-nitrophenol (p-NP) in an aqueous solution. The p-NP is a nitroaromatic compound that has a toxic and mutagenic effect. Its removal from the water system is necessary to protect the environment and living being. The newly synthesized Ti/Cu/Zn-HEG NCs were applied for their higher stability and catalytic activity as a potential candidate for reducing p-NP in practice. The operating parameters, such as p-NP concentration, catalyst dosage, and operating time were optimized for 150 ppm, 400 ppm, and 10 min through response surface methodology (RSM) in Design-Expert software to obtain the maximum reduction p-NP up to 98.4% at its normal pH of 7.1 against the controls (using HEG, Ti/Cu-HEG, and Zn-HEG). Analysis of variance of the response suggested the regression equation to be significant for the process with a major impact on catalyst concentration and operating time. The model prediction data (from RSM) and experimental data were corroborated well as reflected through model's low relative error (RE < 0.10), high regression coefficient (R² > 0.97), and Willmott d-index (d_will-index > 0.95) values.

COVID-19 infection is associated with elevated oxidative stress, systemic hyper-inflammatory responses, endothelial dysfunction, and red blood cell membrane deformability. Nigella sativa extract is widely used in alternative and complementary medicine systems in a large population, due to its highly therapeutic, economic, natural, and safe nature. The aim of this study was to evaluate the effect of N. sativa extract on oxidative stress, hemolysis, proteolysis, and glycation through in vitro studies, as well as to find out its anti-viral potential against severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) using in silico studies. N. sativa seed extract (at 600 µg/mL) displayed 67.33% scavenging activity in the 2,2-diphenyl-1-picrylhydrazyl (DPPH) test, and 70.28% hydrogen peroxide reducing activity. N. sativa exhibited anti-proteolytic activity by decreasing heat-induced denaturation of bovine serum albumin (BSA) and egg albumin by 63.14% and 57.95%, respectively, and exhibited anti-proteinase potential of 66.28% at 600 μg/mL. In addition, heat-induced hemolysis and hypersalinity-induced hemolysis were inhibited by 57.86% and 61.7%, respectively, by the N. sativa seeds. N. sativa also inhibited browning intensity by 56.38%, and percent aggregation index by 51.38%, amyloid structure by 48.28%, and AGE-specific fluorescence by 52.18%, thereby protecting the native structure of BSA from glycation. The binding interactions between bioactive molecules of N. sativa seed with SARS-CoV-2 spike glycoprotein were proven by using in silico molecular docking tools. The functional amino acids involved in the interactions are Asp467, Thr108, Thr114, Ile468, Asn234, Gln155, Glu465, Arg466, Gly232, and Ile233, indicating the inhibiting property of N. sativa on SARS-CoV-2. Finally, we may infer that phytoconstituents of N. sativa seeds have the potential to protect against the spike protein of SARS-CoV-2. Studies on N. sativa seeds might act as a path to develop a potent alternative therapy against viral infections, especially COVID-19 infection, in the future. However, the limitations linked with the use of natural products are also needed to be considered in this regard.

The conversion of biowaste into sophisticated materials was essential for sustainable water treatment. This study documented the transformation of silk fibroin, a renewable biopolymer, into a high-performance, magnetically separable adsorbent via a simple one-pot synthesis. A lanthanum-functionalized magnetic bio-hybrid (MSF-La) was created by co-incorporating La³⁺ ions and Fe₃O₄ nanoparticles into the silk fibroin matrix. It possesses widely distributed active sites and inherent magnetic separation properties, and we have added varying amounts of lanthanum to the silk fibroin polymeric matrix. An outstanding phosphate adsorption capacity of 167.86 milligrams of P per gram of La is demonstrated, surpassing the capacity of pure La(OH)₂, which is 71.42 milligrams of P per gram of La. The adsorbent demonstrated considerable selectivity for phosphate, and its reusability is exceptional, maintaining 89% efficiency across eight consecutive cycles. Remarkably, La and Fe leached from MSF-La_8.5 were consistently measured at 0.2 mg/L across a broad pH range, indicating outstanding structural stability. Mechanistic studies demonstrated that the adsorption process involves synergistic interactions of electrostatic attraction, ligand exchange, and surface precipitation. This study established a sustainable method for converting biowaste into advanced functional materials. Thus, completing the transition from biomass waste to wastewater treatment and purification applications.