The assessment of forest structural parameters is crucial for understanding carbon storage, habitat suitability, and timber stock. However, the labor-intensive and expensive nature of field measurements, coupled with inadequate sample sizes for large-scale modeling, poses challenges. To address the forest structure parameters in the Western Tianshan Mountains, this study used UAV-LiDAR to gather extensive sample data. This approach was enhanced by integrating Sentinel satellite and topographic data and using a Bayesian-Random Forest model to estimate forest canopy height, average height, density, and aboveground biomass (AGB). Validation against independent LiDAR-derived samples confirmed the model’s high accuracy, with coefficients of determination (R²) and root mean square errors (RMSE) indicating strong predictive performance (R² = 0.63, RMSE = 5.06 m for canopy height; R² = 0.64, RMSE = 2.88 m for average height; R² = 0.68, RMSE = 62.84 for density; and R² = 0.59, RMSE = 29.71 Mg/ha for AGB). Notably, the crucial factors include DEM, Sentinel-1 (VH and VV backscatter in dB), and Sentinel-2 (B6, B8A, and B11 bands). These factors contribute significantly to the modeling of forest structure. This technology aims to expedite and economize forest surveys while augmenting the range of forest parameters, especially in remote and rugged terrains. Using a wealth of UAV-LiDAR data, this outcome surpasses its counterparts’ by providing essential insights for exploring climate change effects on Central Asian forests, facilitating precise carbon stock quantification, and enhancing knowledge of forest ecosystems.

More refined and economical aboveground biomass (AGB) monitoring techniques are needed because of the growing significance of spruce plantations in climate change mitigation programs. Due to the challenges of conducting field surveys, such as the potential inaccessibility and high cost, this study proposes a convenient and efficient alternative to traditional field surveys that integrates Gaofen-2 (GF-2) satellite optical images and unmanned aerial vehicle (UAV)-acquired optical and point cloud data to provide a reliable and refined estimation of the aboveground biomass (AGB) in spruce plantations. The feasibility of using data produced from the semiautomatic processing of UAV-based images and photogrammetric point clouds to replace conventional field surveys of sample plots in a young spruce plantation was evaluated. The AGB in 53 sample plots was estimated using data extracted from the UAV imagery. The UAV plot data and GF-2 optical data were used in four regression models to estimate the AGB in the study area. The coefficient of determination (R²), root-mean-square error (RMSE), mean percent standard error (MPSE), and Lin’s concordance correlation coefficient (LCCC) were calculated through five-fold cross-validation and stratified random sampling to evaluate the models’ efficacies. In the end, the most accurate model was used to generate the spatial distribution map of the AGB. The results revealed the following: (1) the individual-tree height (R² = 0.90) and crown diameter (R² = 0.74) extracted from UAV data were accurate enough to replace field surveys used to obtain the AGB at the plot levels; (2) the random forest (RF) model (R² = 0.86; RMSE = 1.75 t/ha; MPSE = 15.75%; LCCC = 0.91) outperformed the ordinary least-squares (OLS) model (R² = 0.68; RMSE = 2.49 t/ha; MPSE = 22.94%; LCCC = 0.81), artificial neural network (ANN) model (R² = 0.67; RMSE = 2.54 t/ha; MPSE = 21.48%; LCCC = 0.80), and support vector machine (SVM) model (R² = 0.60; RMSE = 2.84 t/ha; MPSE = 31.73%; LCCC = 0.76) in terms of the estimation accuracy; (3) an AGB map generated by the random forest model was in good agreement with field surveys and the age of the spruce plantations. Therefore, the method proposed in this study can be used as a refined and cost-effective way to estimate the AGB in young spruce plantations.

Due to the lower canopy height at the maximum crown width at the bottom of young Picea crassifolia trees, they are mixed with undergrowth. This makes it challenging to accurately determine crown size using CHM data or point cloud data. UAV imagery, on the other hand, incorporates rich color information and, after processing, can effectively distinguish between spruce trees and ground vegetation. In this study, the experimental site was an artificial young forest of Picea crassifolia in Shangshan Village, Qinghai Province, China. UAV images were used to obtain normalized saturation data for the sample plots. A marker-controlled watershed segmentation algorithm was employed to extract tree parameters, and the results were compared with those obtained via point cloud clustering segmentation and the marker-controlled watershed segmentation algorithm based on Canopy Height Model (CHM) images. The research results showed that the single tree recognition capabilities of the three types of data were similar, with F-measures of 0.96, 0.95, and 0.987 for the CHM image, UAV imagery, and point cloud data, respectively. The mean square errors of crown width information extracted from the UAV imagery using the marker-controlled watershed segmentation algorithm were 0.043, 0.125, and 0.046 for the three sample plots, which were better than the values of 0.103, 0.182, and 0.074 obtained from CHM data, as well as the values of 0.36, 0.461, and 0.4 obtained from the point cloud data. The point cloud data exhibited better fitting results for tree height extraction compared to the CHM images. This result indicates that UAV-acquired optical imagery has applicability in extracting individual tree feature parameters and can compensate for the deficiencies of CHM and point cloud data.

While the use of large tropical trees to predict aboveground biomass (AGB) in forests has previously been studied, the applicability of this approach in arid regions remains unquantified. In the natural forests of arid mountains of Northwestern China, this study collected individual tree data from 105 plots across 11 sites through field measurements. The objective was to assess the feasibility of using large trees for predicting plot AGB in these natural forests of arid mountains. This entailed determining the contribution of large trees, based on which a plot AGB prediction model was constructed. This study also aimed to identify the optimal number of large trees needed for accurate AGB prediction. The findings indicate that within the natural forests of arid mountains, only seven large trees (approximately 12% of the trees in a plot) are necessary to account for over 50% of the plot AGB. By measuring 18 large trees within a plot, this study achieved a precise plot AGB estimation, resulting in a model rRMSE of 0.27. The regression fit R² for the predicted AGB and the estimated AGB was 0.79, effectively aligning the predicted and measured AGB. In the Tianshan Mountains’ natural forests, the prediction model yielded further improvements with an rRMSE of 0.13 and a remarkable regression R² of 0.92 between predicted and estimated AGB. However, due to variances in tree size distribution and tree species biomass, the Altai Mountains’ natural forest was found to be unsuitable for predicting plot AGB using large trees. This study establishes that large trees can effectively represent plot AGB in the natural forests of arid mountains. Employing forest surveys or remote sensing to collect data from a few large trees instead of the entire tree population enables accurate plot AGB prediction. This research serves as the initial quantification of large tree utilization for plot AGB prediction in the natural forests of arid mountains, carrying substantial implications for future arid forest inventories, carbon accounting, and the formulation of prudent conservation strategies.