This article reports the findings of a numerical study of mode conversion between fundamental Lamb and Rayleigh waves and vice versa in quarter and half spaces. Fundamental Lamb wave ( and ) propagation in a plate attached to a quarter space and the subsequent mode conversion to a Rayleigh wave was studied using finite element analysis. B-Scans show that a beat-like phenomenon can be observed for the R → L conversion and a generation length can be observed for the L → R conversion. The quarter-space model was also used to study the Rayleigh to Lamb mode conversion. Two hypotheses were developed based on the observed mode conversion efficiencies: (a) the main driving factor of mode conversion between Lamb and Rayleigh waves is the grazing incidence of bulk modes and (b) due to scattering and diffraction, the modes will require a generation length to stabilize in amplitude. Both hypotheses were tested and confirmed using numerical models, including a half-space model to study the diffraction of bulk waves from an incident Lamb wave. The results are of significance for nondestructive evaluation of complex structures where such structural discontinuities exist and it becomes important to understand the fundamental mode conversion phenomenon.
2 January 2023 in Research in Nondestructive Evaluation
Rolling Contact Fatigue or Damage (RCF/RCD) presents significant maintenance challenges to railroads across the globe. Quantifying RCF/RCD crack depths and density in rails is important for all railroads to manage their grinding programs effectively and efficiently and being able to conduct ultrasonic testing (UT) of rails for reliable detection of internal fatigue damage. This work focuses on the modeling of Rayleigh waves UT approach to detect and characterize RCF type of defects which can form as: vertical, oblique or branched shaped surface breaking defects in the rail head. Specifically, the transmission coefficient (Tc) of Rayleigh waves was studied using finite element analysis (FEA). The effect of crack tip geometry on Tc values is discussed. The results suggest that for oblique, and branch cracks, characterization based purely on the Tc can be challenging due to symmetric sinusoidal fluctuations in the Tc. A real crack using a micrograph image was also modeled to validate the Tc results for oblique and branched cracks. This points to the need for additional parameters to be identified for efficient and reliable characterization of RCF/RCD type of defects in rails.