Remote sensing (RS) is often employed to estimate suspended sediment concentration (SSC) in rivers, and the availability of hyperspectral imagery enhances the effectiveness of RS-based water quality monitoring due to its high spectral resolution. Yet, the necessity of hyperspectral imagery for SSC estimation in rivers has not been fully validated. This study thus compares the performance of hyperspectral RS with that of multispectral RS by conducting field-scale experiments in shallow rivers. In the field experiments, we measured radiance from a water body mixed with suspended sediments using a drone-mounted hyperspectral sensor, with the sediment and riverbed types considered as controlling factors. We retrieved the SSC from UAV imagery using an optimal band ratio analysis, which successfully estimated SSC distributions in the sand bed conditions with both multispectral and hyperspectral data. In the vegetated bed conditions, meanwhile, the prediction accuracy decreased significantly due to the temporally varying bottom reflectance associated with the random movement of vegetation caused by near-bed turbulence. This is because temporally inhomogeneous bottom reflectance distorts the relationship between the SSC and total reflectance. Nevertheless, the hyperspectral imaging exhibited better prediction accuracy than the multispectral imaging, effectively extracting optimal spectral bands sensitive to back-scattered reflectance from sediments while constraining the bottom reflectance caused by the vegetation-covered bed.
The dispersion coefficients are crucial in understanding the spreading of pollutant clouds in river flows, particularly in the context of the depth-averaged two-dimensional (2D) advection–dispersion equation (ADE). Traditionally, the 2D stream-tube routing procedure (2D STRP) has been the predominant method for determining both the longitudinal and transverse dispersion coefficients of the 2D ADE under transient concentration conditions. This study aims to quantitatively analyze and address the limitations of the 2D STRP using hypothetically generated data. The findings of these evaluations revealed that the existing 2D STRP failed to accurately reproduce reliable results when the tracer clouds reached wall boundaries. This limitation prompted the development of the 2D STRP-i, which effectively resolves this drawback. The newly developed routing-based observation method, 2D STRP-i, enables the reliable estimation of dispersion coefficients, considering the effect of the wall boundary. The results indicated that the existing 2D STRP yielded 2D dispersion coefficients with relative errors ranging from 40% to 200%, while 2D STRP-i consistently yielded relative errors of 3% to 5% on average. When applied to tracer test data obtained through remote sensing, the 2D STRP-i demonstrated its ability to accurately observe temporal concentration distributions, even when wall boundaries have a significant impact on contaminant transport.
Understanding the dynamics of hyporheic flow is important for managing water resources, since this interfacial flow exchange affects the fate and transport of contaminants in rivers. This study numerically quantifies the effect of hyporheic exchange on solute residence times in surface water systems by simulating solute transport in unified turbulent open-channel and hyporheic zone systems. Interfacial hyporheic fluxes (qint) increase with increased Reynolds number (Re) that produces an enhanced bottom pressure gradient over the ripple bed. Heavy-tailed breakthrough curves emerge when hyporheic flow is considered in transport simulation. This reveals that hyporheic flow is a dominant driver of non-Fickian transport in surface water as this interfacial flow exchange delays solute transport with slow porewater flows. Furthermore, the increase in Re extends the longitudinal spreading of solute tracers because a higher surface flow velocity intensifies the magnitude of hyporheic flow and associated storage effects. This can be confirmed by the ratio of the maximum residence time to the peak arrival time that increases with the increase in Re, following a power-law relationship with both Re and qint.