The generation of an elliptical Bessel–Gauss beam has become a topic of interest in ultrafast laser processing of transparent materials because of its nearly non-diffractive elliptical central core. These beams can show potential in generating anisotropic structures down to the nanoscale and in producing asymmetries in the induced fields of thermo-mechanical constraints relevant for material structuring. However, maintaining the central core ellipticity is a challenge that requires further analysis, notably in the propagation behavior of phase anisotropies during the conical interference. This paper presents the controlled generation and propagation of a highly elliptical Bessel–Gauss beam using asymmetric phase-modulation technique. The study involves engineering different asymmetric phase holograms and analyzing their performances in terms of the non-diffractive property and uniformity of the generated beams. We indicate the presence in specific cases of diffraction and its influence on the invariance of the beam shape. The simulation results are in excellent agreement with the experimental results, which verifies the accuracy and reliability of our approach.
High-luminance light sources are challenging to achieve with light-emitting diodes (LEDs) due to power droop. Since laser diodes (LDs) do not suffer from power droop, they can be used as an alternative. A novel, to the best of our knowledge, high-luminance white light source was developed utilizing LDs combined with a sediment silicone/phosphor composite. The deposition of this sediment phosphor inside an aluminum spacer on top of a sapphire backplate ensures optimal thermal management. To enhance the optical performance, the sapphire plate is coated with a custom-designed blue pass filter in order to recycle most of the converted light that is emitted in the backward direction. The maximal obtained luminance of this light source is 103 MCd/m2 at a luminous flux of 3119 lm.
With the advent of intense infrared laser solutions, three-dimensional laser writing progressively becomes applicable to silicon (Si) and other semiconductors. However, the nonlinearities required for bulk-energy deposition also induce severe beam distortions, causing processing difficulties in the short-wave infrared domain. Here, we assess the potential of longer wavelengths in the mid-infrared (MIR) domain by systematically comparing microplasma formation and material modification in Si using sub-200-fs pulses at 1.4 and 4 μm. Under identical tight-focusing conditions, both wavelengths generate well-defined plasmas with similar maximum densities at ≈1020 cm−3. Z-scan writing experiments exploring energies exceeding the observed ionization limit show that neither wavelength enables internal structuring of Si, in contrast to temporally stretched picosecond pulses. While ionization dynamics and characteristics can be varied significantly with wavelength, we show that pronounced filamentary effects restrict the potentially expected advantages of the MIR domain for ultrafast laser internal structuring of semiconductors.
The polarization‐dependent diffraction efficiency inherent to liquid‐crystal spatial light modulators (SLM) is exploited to create coaxial double‐focus laser beams. The axial separation and peak‐intensity balance between the beam foci are independently controlled by actively tuning the encoded quadratic phase hologram applied to the SLM and adjusting the input laser polarization. With this and exploiting the high reflectivity of silicon, internal micro‐interactions with counterpropagating infrared pulses have become accessible by only using a single focusing element. By comparatively probing ultrafast nonlinear excitation dynamics, we show that the added angular light components and the dual‐pulse nature of the cooperative interactions under the proposed configuration, immediately lead to an enhancement of the local excitation conditions in bulk silicon. We report on the achievement of near‐critical plasma densities reaching up to , a value inaccessible by conventional focusing. This opens the door to plasma‐optics experiments and material transformations at increased energy density levels, with three‐dimensional controllability inside silicon and other narrow‐bandgap materials.