Turpentine, an important source of terpenes, is composed mainly of α-pinene, δ-carene, β-pinene, myrcene, and limonene. This compound exhibits relatively high chemical reactivity due to its unsaturated double bond. Hydrogenation is a common method for saturating compounds. Compared to precious metals, which are expensive, rare, and difficult to obtain, nickel catalysts offer a more cost-effective alternative, despite their slightly lower catalytic efficiency. Bimetallic catalysts have demonstrated excellent activity in hydrogenating various compounds into their intended products. The addition of a second metal can result in synergistic interactions and enhanced activity of the metallic sites. In this research, we conducted the hydrogenation of turpentine using nickel, nickel-iron and nickel-zinc nanoparticles as catalyst. The reaction was carried out in a minireactor with a low-pressure reaction condition of 4 atm, 50°C, and 24 h. The result indicates that catalysts formed had sizes ranging from 37 to 97 nm, achieving pinane yield between in 3 and 40%. These findings encourage further investigation into more optimal conditions and the effect of using other metal.
This study used a combination of leaves extracts from Ruellia tuberosa L. and Tithonia diversifolia plants encapsulated using gum Arabic. The selection of leaves in medicinal plants because they are rich in bioactive compounds that provide health benefits. The encapsulation technique was microencapsulation through freeze-drying, since the nanoencapsulation for the plant extracts is unlikely to be conducted due to their large particle sizes. The resulting microcapsules were then tested their biological activities in vitro. Several conditions affect microcapsules’ production, including pH, gum Arabic concentration, and stirring time were assessed. The optimum conditions were chosen based on the highest encapsulation efficiency. The results showed that the optimum microcapsules preparation was achived at pH 5, gum Arabic concentration of 4% (w/v), and stirring time of 60 min with an encapsulation efficiency of 84.29%. The in vitro assays include inhibition of alpha-amylase and antioxidant activities, resulted in the respective IC50 values of 54.74 μg/mL and 152.74 μg/mL. Releases of bioactive compounds from the microcapsules were investigated under pH 2.2 and pH 7.4 from 30 to 120 min. Results indicated a release of 43.10% at pH 2.2 and 42.26% at pH 7.4 during 120 min, demonstrating the controlled release behavior of the encapsulated bioactive compounds; nonetheless, their release behavior was not pH-dependent. This study confirms that microencapsulation has an important role in the development of plant extracts with maintained biological functions as well as maintaining their stability.
1 January 2018 in IOP Conference Series: Materials Science and Engineering
This research presents the degradable bioplastics developed from pinewood nanocellulose as a filler in PVA matrices. The steps involve the isolation and characterization of cellulose and nanocellulose. Meanwhile, the manufacturing of degradable bioplastic involves the combination of PVA, nanocellulose, and with or without orange peel extract. The effect of bioplastics without the addition of citric acid and orange peel extract is also reported as a comparison. It is found that orange peel extract improves the tensile strength (1708.54 kPa), elastic modulus (42.71 kPa), elongation (40%), and degradability (78.44% in 2 weeks) compared to bioplastic without the orange peel extract. These results indicate that orange peel extract acts as a reinforcing agent in PVA-nanocellulose bioplastic.