Aiming at the problems of low machining accuracy and more serious tool wear in the traditional diamond grinding machining (DGM) microstructure of hard and brittle materials, this paper proposes high-speed rotary ultrasonic machining (HRUM) technology and develops a HRUM machine tool. The hardware part of the machine tool mainly includes the spindle module, micro-motion system module, ultrasonic machining tank module, and data acquisition (DAQ) system module. The LabView-based controlled machining control system, including motion selection, initialization, coarse tool setting, constant force tool setting, control machining, and coordinate display module, is developed. Comparative experimental research of the HRUM and DGM of small holes in Al2O3 ceramics is carried out in the developed HRUM machine tool. The results demonstrate that HRUM effectively reduces axial cutting forces, reduces binder adhesion, and suppresses slippage while improving tool-cutting ability and extending tool life compared to DGM under the same machining parameters. This technology has essential research significance for the high-precision and efficient machining of microstructures in hard and brittle materials.
16 November 2023 in The International Journal of Advanced Manufacturing Technology
Such as silicon and glass and other hard brittle materials have strong inertness and chemical stability, are the ideal substrate for the preparation of micro-channel. In order to realize high precision and high-efficiency machining of hard and brittle materials micro-channel, the author innovatively proposed a new technology called template-based electrophoretically assisted micro-ultrasonic machining (TBEPAMUSM). The micro-channel shape punch-pin was transferred to the workpiece by micro-ultrasonic machining (MUSM). Due to the electrophoretic characteristics of ultrafine abrasive particles, applying DC field can guarantee the existence of the ultrafine abrasive in machining area. Four process parameters (Average particle size, Particle concentration, Ultrasonic power and Electrophoretic DC voltage) single - factor experiment and orthogonal experiment were carried out for TBEPAMUSM. The single - factor experimental study found that: 1) The increase of average particle size and ultrasonic power can effectively improve the material removal rate (MRR), but the surface roughness (SR) also decreases. 2)The increase of abrasive concentration will reduce the SR, but suitable concentration can maximize the MRR. 3) When suitable DC voltage were introduced, the MRR and SR can be effectively improved. The orthogonal experiment results show that average particle size has the greatest effect on both SR and MRR. Considering the balance between machining quality and machining efficiency, the optimal parameters were as follows: ultrasonic power 70%, average abrasive particle size 18 µm, abrasive concentration 18%, DC voltage 40 V.