In recent decades, the rapid rise in electricity demand has compelled transmission and distribution systems to operate at almost their maximum capacity. This can pose numerous technical challenges such as excessive power losses, voltage and transient instabilities, as well as reduced power quality and reliability. Employment of Flexible Alternating Current Transmission System (FACTS) devices can be an effective approach to obviate such challenges and reinforce the power system functionality. Nevertheless, FACTS devices require a high initial investment, and hence their optimal allocation in terms of various aspects such as type, size and location is of utmost importance. This cannot be achieved without the deployment of optimization techniques. The aim of this paper is to provide a comprehensive review of the existing proposals for the enhancement of power system performance adopting FACTS devices. Adhering to that, an in-depth analysis is carried out, in which the most pertinent options are classified into specific groups based on their optimization objectives. Finally, a comparative analysis is accomplished in which the main attributes and drawbacks of each optimization technique are presented.

Load modeling is essential to distribution system analysis, planning, and control. Therefore, in this work, effect of non-linear load models has been considered for the optimal site and size of DG and SC allocation. A new and efficient modified branch and bus ordering-based forward-backward load flow method has been applied to solve load flow problem in radial distribution system. Recently implemented several state-of-the-art evolutionary algorithms (EAs) are employed to solve optimal site and size of DG and SC allocation problems and it is shown that performance of multi-operator/multimethod is better than other algorithms that are based on a single operator and/or algorithm. Therefore, a new hybrid EA based on various state-of-the-art operators such as GA, DE, and PSO is designed and applied to solve optimal site and size of DG and SC allocation problems. Various technical objective functions (index of active and reactive power loss and voltage deviation index) are considered to show the impacts of non-linear load models. From the simulation results, it is shown that DG and SC allocation problem is multi-objective. Therefore, further weighted sum multi-objective technical, economic, and environmental functions are formulated to find the solution to DG and SC allocation problems. The gathered results demonstrate that the proposed methodology significantly minimizes the cost of energy supplied by grid, total operating cost, and active and reactive power losses. Consequently, it can be stated that the suggested methodology has considerable economic and technological benefits and may be used to address many optimization issues in various distribution networks.

Single objective constant PQ load models were extensively considered for site and size of distributed generation (DG) and shunt capacitor (SC) allocation. Which may lead to single non-dominated solution of unpredictable and misleading results about their site and size, loss reduction and payback period. Therefore, primary objective of this study is to investigate the effects of seven nonlinear voltage-dependent load models for the siting and sizing of DG and SC considering various conflicting Multiobjective functions. These objective functions are minimization of active power loss, voltage deviation, cost of energy loss per year, the total cost of installed DG and SC, and emission. Three study cases of simultaneous optimization of two and three objective functions are intended to find optimal integration of DG and SC in the standard 33 and 118-bus radial distribution network considering seven nonlinear voltage-dependent load models. A new Multiobjective evolutionary algorithm (MOEA) called Bidirectional Coevolutionary (BiCo) is applied to the proposed study cases to demonstrate the impact of load model on DG and SC allocation. Further, to show the superiority and performance of proposed algorithm, six state-of-the-art MOEAs are implemented and statistically compared with proposed algorithm using a representative hypervolume indicator (HVI). The maximum savings in annual cost of annual energy loss reaches 58.99% in case1 of PQ load model, 59.4% in case 2 and 64.96% in case 3 of industrial load model considering only DG allocation, whereas, 93.673% in constant PQ load model of case1, 78.908% in constant current load model of case2 and 93.403% of case3 of PQ load model considering simultaneous DG and SC. Simulation results show that the proposed algorithm is adept and suitable to find a better trade-off between various conflicting objective functions compared to other recently designed MOEAs.

The increasing demand for solar renewable energy resources, driven by the global energy crisis and the depletion of conventional energy sources, has underscored the importance of harnessing solar energy. Solar photovoltaic (PV) systems, however, exhibit nonlinear output power due to their weather-dependent nature, impacting overall system efficiency. This study focuses on the development and comparative analysis of three intelligent Maximum Power Point Tracking (MPPT) controllers using the MATLAB Simulink. The controllers employ distinct methodologies, namely, Artificial Neural Networks (ANN), Adaptive Neural and Fuzzy Inference System (ANFIS), and Fuzzy Logic Controller (FLC). The results demonstrate that ANFIS achieved the highest accuracy at 99.50%, surpassing ANN and FLC with accuracies of 97.04% and 98.50%, respectively, thus establishing ANFIS as the superior MPPT controller. Additionally, the positives and negatives of all three MPPT-based algorithms are also compared in this work.

Numerous green computing applications employ sustainable energy sources to abate redundant energy consumption. Renewable energy sources are vital to improving energy efficiency and should be used optimally. This paper introduces the Energy Proficient Computing Framework (EPCF) in the resource-centric cloud environment. The main objective of the EPCF is to improve the shared efficiency of energy distribution in the computing systems. Renewable energy is distributed among computers according to their running status and the number of calculations available. Traditional k-means clustering separates the states and computations when making this determination. This mapping procedure is repeated throughout the computation until the energy is dispersed without waste. Energy is conserved for the later use if the sources of the leak can be located in advance. As a result, we can conserve and use energy more effectively. In addition, it speeds up calculations and decreases service allocation waiting times. The proposed framework achieves 14.69% less energy cost for the different service al-location rates, 6.34% less energy drain, and 14.4% high efficiency.

The increasing penetration of Distributed Generators (D.G.) into the existing power system has brought some real challenges regarding the transient response of electrical systems. The injection of D.G.s and abrupt load changes may cause massive power, current, and voltage overshoots/undershoots, which consequently affects the equilibrium of the existing power system and deteriorate the performance of the connected electrical appliances. A robust and intelligent control strategy is of utmost importance to cope with these issues and enhance the penetration level of D.G.s into the existing power system. This paper presents a Modified Particle Swarm Optimization (MPSO) algorithm-based intelligent controller for attaining a desired power-sharing ratio between the M.G. and the main grid with an optimal transient response in a grid-tied Microgrid (M.G.) system. The proposed MPSO algorithm includes an additional parameter named best neighbor particles (rbest) in the velocity updating equation to convey additional information to every individual particle about all its neighbor particles, consequently leading to the increased exploration capability of the algorithm. The MPSO algorithm optimizes P.I. parameters for transient and steady-state response improvement of the studied M.G. system. The main dynamic response evaluation parameters are the overshoot and settling time for active and reactive power during the D.G. connection and load change. Furthermore, the performance of the proposed controller is compared with the PI-PSO-based MG controller, which validates the effectiveness of the proposed M.G. control scheme in maintaining the required active and reactive power under different operating conditions with minimum possible overshoot and settling time.