In this paper, a new optimization method for the design of nearly linear-phase two-dimensional infinite impulse (2D IIR) digital filters with a separable denominator is proposed. A design framework for 2D IIR digital filters is formulated as a nonlinear constrained optimization problem where the group delay deviation in the passband is minimized under prescribed soft magnitude constraints and hard stability requirements. To achieve this goal, sub-level sets of the group delay deviations are utilized to generate a sequence of filters, from which the one with the best performance is selected. The quality of the obtained filter is evaluated using three quality factors, namely, the passband magnitude quality factor and the group delay deviation quality factor , while the third one is a new quality factor that assesses the performance in the stopband relative to the minimum filter gain in the passband. The proposed framework is implemented using the interior-point (IP) method in a MATLAB environment, and the experimental results show that filters designed using the proposed method have good magnitude response and low group delay deviation. The performance of the resulting filters is compared with the results of other methods.
This paper presents a new method for the design of separable denominators 2-D IIR filters with nearly linear phase in the passband. The design method is based on a balanced-realization model reduction technique. The nearly linear-phase 2-D IIR filter is designed using 2-D model reduction from a linear-phase 2-D FIR filter, which serves as the initial filter. The structured controllability and observability Gramians $P^s$ and $Q^s$ serve as the foundation for this technique. These Gramians are block diagonal positive-definite matrices that satisfy 2-D Lyapunov equations. An efficient method is used to compute these Gramians by minimizing the traces of $P^s$ and $Q^s$ under linear matrix inequalities (LMI) constraints. The use of these Gramians ensures that the resulting 2-D IIR filter preserves stability and can be implemented using a separable denominator 2-D filter with fewer coefficients than the original 2-D FIR filter. Numerical examples show that the proposed method compares favorably with existing techniques.
This paper presents a new method for the design of separable-denominator 2-D IIR filters with nearly linear phase in the passband. The design method is based on a balanced realization model reduction technique. The nearly linear-phase 2-D IIR filter is designed using 2-D model reduction from a linear-phase 2-D FIR filter, which serves as the initial filter. The structured controllability and observability Gramians and serve as the foundation for this technique. onal positive-definite matrices that satisfy 2-D Lyapunov equations. An efficient method is used to compute these Gramians by minimizing the traces of and under linear matrix inequality (LMI) constraints. The use of these Gramians ensures that the resulting 2-D IIR filter preserves stability and can be implemented using a separable-denominator 2-D filter with fewer coefficients than the original 2-D FIR filter. Numerical examples show that the proposed method compares favorably with existing techniques.