This paper addresses the challenge of mitigating low-frequency flow noise signals in autonomous underwater vehicles through the optimization of a placoid-scale skin. Drawing inspiration from the bio-inspired surface features of cylindrical shell structures, an enhanced design of placoid-scale skin is developed using 3D printing technology. This improved structure effectively reduced boundary layer vortices and wake intensity, thereby contributing to the suppression of low-frequency flow noise signals. Experimental results demonstrate that the notable reduction in low-frequency flow noise within the frequency range of 0–500 Hz, with average noise reduction of approximately 5 dB observed at 150 Hz. This reduction is validated by a combination of numerical simulations and experimental testing, confirming the efficacy of the optimized placoid-scale skin in attenuating the low-frequency flow noise associated with uniformly advancing turbulent boundary layers underwater.

Road traffic noise is a special kind of high amplitude noise in seismic or acoustic data acquisition around a road network. It is a mixture of several surface waves with different dispersion and harmonic waves. Road traffic noise is mainly generated by passing vehicles on a road. The geophones near the road will record the noise while receiving the seismic signal. The amplitude of the traffic noise is much larger than the signal, which masks the effective information and degrades the quality of acquired data. At the same time, the traffic noise is coupled with the effective signal, which makes it difficult to separate them. Therefore, attenuating traffic noise is the key to improving the quality of the final processing results. In recent years, denoising methods based on convolution neural networks (CNN) have shown good performance in noise attenuation. These denoising methods can learn the potential characteristics of acquired data, thus establishing the mapping relationship between the original data and the effective signal or noise. Here, we introduce a method combining UNet networks with asymmetric convolution blocks (ACBs) for traffic noise attenuation, and the network is called the ACB-UNet. The ACB-UNet is a supervised deep learning method, which can obtain the distribution characteristics of noise and effective signal through learning the training data and then effectively separate the two to achieve noise removal. To validate the performance of the proposed method, we apply it to synthetic and real data. The data tests show that the ACB-UNet can obtain good results for high amplitude noise attenuation and is practical and efficient.

A partition method, with an efficient divide and conquer partition strategy, for the non-uniform sampling signal reconstruction based on Fourier reconstruction sparse inversion (FRSI) is developed. The novel partition FRSI(P-FRSI) is motivated by the...