This paper presents a novel microstrip patch antenna design using slots and parasitic strips to operate at the n77 (3.3–4.2 GHz)/n78 (3.3–3.8 GHz) band of sub-6 GHz and n96 (5.9–7.1 GHz) band of sub-7 GHz under 5G New Radio. The proposed antenna is simulated and fabricated using an FR-4 substrate with a relative permittivity of 4.3 and copper of 0.035 mm thickness for the ground and radiating planes. A conventional patch antenna with a slot is also designed and fabricated for comparison. A comprehensive analysis of both designs is carried out to prove the superiority of the proposed antenna over conventional dual-band patch antennas. The proposed antenna achieves a wider bandwidth of 160 MHz at 3.45 GHz and 220 MHz at 5.9 GHz, with gains of 3.83 dBi and 0.576 dBi, respectively, compared to the conventional patch antenna with gains of 2.83 dBi and 0.1 dBi at the two frequencies. Parametric studies are conducted to investigate the effect of the parasitic strip’s width and length on antenna performance. The results of this study have significant implications for the deployment of high-gain compact patch antennas for sub-6 GHz and sub-7 GHz 5G wireless communications and demonstrate the potential of the proposed design to enhance performance and efficiency in these frequency bands.

This paper presents the generation of orbital angular momentum (OAM) vortex waves with mode +1 using dielectric resonator antenna (DRA) array. The proposed antenna was designed and fabricated using FR-4 substrate to generate OAM mode +1 at 3.56 GHz (5G new radio band). The proposed antenna consists of 2 × 2 rectangular DRA array, a feeding network, and four cross slots etched on the ground plane. The proposed antenna succeeded in generating OAM waves; this was confirmed by the measured radiation pattern (2D polar form), simulated phase distribution, and intensity distribution. Moreover, mode purity analysis was carried out to verify the generation of OAM mode +1, and the purity obtained was 53.87%. The antenna operates from 3.2 to 3.66 GHz with a maximum gain of 7.3 dBi. Compared with previous designs, this proposed antenna is low-profile and easy to fabricate. In addition, the proposed antenna has a compact structure, wide bandwidth, high gain, and low losses, thus meeting the requirements of 5G NR applications.