This paper develops the mechanical and durable samples of C50 high-performance concrete, studies the mechanical properties, crack resistance, sulfate attack resistance, frost resistance, and impermeability of concrete with different mineral admixtures of mineral powder and fly ash, and obtains the best mineral admixture of mineral powder and fly ash to improve the performance of high-performance concrete. The results show that the doping effect is the best when the ratio of prepared mineral powder to fly ash is 3:2. With the increase in the mineral powder–fly ash admixture, the slump and expansion of high-performance concrete decrease rapidly at first and then slowly. In total, 60% doping is the turning point; the compressive and flexural strengths of concrete decreased slowly at first and then rapidly. Taking 30% of the admixture as the turning point, 35% of the mineral powder fly ash is generally selected. By mixing and adding a certain proportion of fly ash and mineral powder admixtures, the crack resistance of concrete is enhanced, and the shrinkage and cracking are reduced. The corrosion resistance coefficient will exceed 88%, the relative dynamic elastic modulus will exceed 95%, and the impermeability grade will reach P17. The durability of concrete can be improved by adding mineral admixtures.
Losses from floods and the wide range of impacts have been at the forefront of hazard-triggered disasters in China. Affected by large-scale human activities and the environmental evolution, China’s defense flood situation is undergoing significant changes. This paper constructs a comprehensive flood disaster risk assessment model through systematic analysis of four key factors—hazard (H), exposure (E), susceptibility/sensitivity (S), and disaster prevention capabilities (C)—and establishes an evaluation index system. Using the Analytic Hierarchy Process (AHP), we determined indicator weights and quantified flood risk via the following formula R = H × E × V × C. After we applied this model to 16 towns in coastal Zhejiang Province, the results reveal three distinct risk tiers: low (R < 0.04), medium (0.04 ≤ R ≤ 0.1), and high (R > 0.1). High-risk areas (e.g., Longxi and Shitang towns) are primarily constrained by natural hazards and socioeconomic vulnerability, while low-risk towns benefit from a robust disaster mitigation capacity. Risk typology analysis further classifies towns into natural, social–structural, capacity-driven, or mixed profiles, providing granular insights for targeted flood management. The spatial risk distribution offers a scientific basis for optimizing flood control planning and resource allocation in the district.
A new type joint of Circular Tubed Steel‐Reinforced Concrete (CTSRC) columns was designed in this paper. The structural characteristics, manufacturing process, and mechanical properties of raw materials of the new joint were introduced. In order to simulate the earthquake action, two joint specimens were subjected to low‐cycle cyclic loading at the end of the column. Based on the in‐depth study of the failure characteristics, load‐displacement hysteretic curve, skeleton curve, ductility index, load‐strain hysteretic curve in the core area of the joint, energy dissipation performance, strength and stiffness degradation performance, and shear deformation in the core area of the joint during the whole loading process, the seismic behavior of this new type of joint was investigated. The results show that the new joint has reasonable failure characteristics, high bearing capacity, good ductility, excellent seismic energy dissipation performance, and strong resistance to strength and stiffness degradation, which meets the seismic design principle of “strong joint and weak component” and is suitable for the results with special requirements for seismic performance. In addition, preliminary design recommendations were put forward. The research results of this paper can provide a theoretical basis for the application of this kind of new structure.
26 August 2025 in International Journal of Structural Stability and Dynamics