Explore full metrics on Scilit
(Calculated once Scilit publication data is synced: current year − year of first publication + 1)
采用固相反应法合成了(Sr0.2Nd0.208Ca0.488)Ti1-x(Mg1/3Ta2/3)xO3(0.2≤x≤0.5, SNCTMTx)系微波介质陶瓷, 分析了SNCTMTx (0.2≤x≤0.5)陶瓷的相组成、显微结构、烧结特性和微波介电性能之间的关系。XRD晶体结构分析表明: 当x=0.2时, SNCTMTx陶瓷为单一正交钙钛矿结构, 当x值增为0.3~0.5时, 陶瓷体呈现正交钙钛矿相、SrO与未知相多相共存状态。随着(Mg1/3Ta2/3)4+含量的增加, 体系中第二相的出现及含量的改变导致εr先增后减, 而Q×f值出现先降后升的原因是B位离子1:2有序度的出现与范围的增加抑制了第二相进一步恶化品质因子;此外, τf逐渐向近零方向偏移与氧八面体的畸变程度密切相关。当x=0.5时, 在1530℃烧结4 h得到的SNCTMTx陶瓷微波介电性能较优: εr =55.3, Q×f ≈7400 GHz, τf ≈23.6×10–6/℃。
(Sr0.2Nd0.208Ca0.488)Ti1-x(Mg1/3Ta2/3)xO3 (0.2≤x≤0.5, SNCTMTx) ceramics were prepared by solid sate reaction technique. Wherein, the relation between phase compositions, microstructures, sintering properties, and microwave dielectric properties of the SNCTMTx (0.2≤x≤0.5) ceramic systems were studied. The XRD results indicated that a single phase with orthorhombic perovskite-like structure was formed in the sample with x = 0.2, and a mixed phase system was formed in the samples with given compositional range x = 0.3 – 0.5 composed of orthorhombic perovskite phase, SrO phase and unknown second phase. Additionally, the εr first increased and then decreased, affected by the appearance and the content of the second phase. Meanwhile, the Q×f value showed down?first?and?then up with the increase of (Mg1/3Ta2/3)4+ content because the increasing degree of 1:2 ordering could suppress the reduction in quality factor. Moreover, the τf gradually shifted to near-zero direction, which resulted from the variation of the oxygen octahedral distortion. The SNCTMTx (x=0.5) ceramic sintered at 1530℃ for 4 h showed better microwave dielectric properties with εr = 55.3, Q×f ≈ 7,400 GHz and τf ≈ 23.6×10–6/℃.