The article aims to investigate the state of soil elements in upland agriculture and the state of pesticide contamination in the environment of differing highland agricultural areas in Thailand. The number of heavy metals present was Fe > Mn > Zn > Pb > Ni > Cu > Cd, dominant...
Rapid economic growth has led to an increase in the use of multilayer plastic packaging, which involves complex polymer compositions and hinders recycling. This study investigated the catalytic pyrolysis of plastic packaging waste in a 3000 cm3 semibatch reactor, aiming to optimize kerosene-like hydrocarbon production. The temperature (420–500 °C), N2 flow rate (25–125 mL/min), and catalyst loading (5–20 wt.%) were examined individually and in combination with activated carbon and an Fe-doped dolomite (Fe/DM) catalyst. Central composite design (CCD) and response surface methodology (RSM) were used to identify the optimal conditions and synergistic effects. Pyrolysis product analysis involved simulation distillation gas chromatography (Sim-DGC), gas chromatography/mass spectrometry (GC/MS), and Fourier transform infrared (FT-IR) spectroscopy. The optimal conditions (440 °C, 50 mL/min N2 flow, catalyst loading of 10 wt.% using a 5 wt.% Fe-doped dolomite-activated carbon 0.6:0.4 mass/molar ratio) yielded the highest pyrolysis oil (79.6 ± 0.35 wt.%) and kerosene-like fraction (22.3 ± 0.22 wt.%). The positive synergistic effect of Fe/DM and activated carbon (0.6:0.4) enhanced the catalytic activity, promoting long-chain polymer degradation into mid-range hydrocarbons, with secondary cracking yielding smaller hydrocarbons. The pore structure and acid sites of the catalyst improved the conversion of intermediate hydrocarbons into aliphatic compounds (C5–C15), increasing kerosene-like hydrocarbon production.
The increasing energy demand and global dependence on conventional fuels have resulted in severe greenhouse gas (GHG) emissions, necessitating the development of sustainable bioenergy alternatives. Algal is recognized as a promising feedstock for the production of fourth-generation biofuels. This study optimizes catalytic pyrolysis of Arthrospira platensis for bio-oil production via a dual-bed catalyst system of iron-impregnated dolomite (Fe/DM) and a copper-impregnated spent fluid catalytic cracking catalyst (Cu/sFCC). A face-central composite design (FCCD) and response surface methodology (RSM) were used for the delineation of optimal conditions, ensuring that all experimental tests remained within feasible operating conditions of 500–600 °C, a reaction time of 45–75 min, a N2 flow rate of 50–200 mL/min, and a catalyst loading of 5–20 wt%. The bio-oil yield was maximized at 39.73 ± 2.86 wt% at 500 °C for 45 min, a N2 flow of 50 mL/min, and 5 wt% catalyst loading to feedstock with a 0.4:0.6 mass ratio of Fe/DM: Cu/sFCC. The dual-catalysts combined Brønsted and Lewis acid sites enhanced the catalytic activity, which promotes the cleavage of carbon–carbon and carbon–hydrogen bonds, including the mechanism of catalytic pathways such as dehydration, decarboxylation, oligomerization, aromatization, and further cracking reactions, and was successful in converting high-molecular-weight molecules into lighter hydrocarbons and significantly improving product selectivity, demonstrating a highly effective pathway for producing high-quality sustainable biofuel.
1 December 2024 in Journal of Ecological Engineering
Thailand experiences plastic waste and microplastic contamination (MPs) caused by waste disposal and leachate treatment systems. MPs often escaped from the leachate treatment. This research collected leachate and sludge samples from the leachate treatment system. This research aimed to determine...