Nowadays, LED lamps have become a widespread solution in different lighting systems due to their high brightness, efficiency, long lifespan, high reliability and environmental friendliness. The choice of a proper LED driver circuit plays an important role, especially in terms of power quality. In fact, the driver controls its own input current in addition to the LED output current, thus it must guarantee a high power factor. Among the various LED drivers available on the market, the quasi-resonant (QR) flyback topology shows interesting benefits. This paper aims at investigating and analyzing the different issues related to the input current distortion in a QR flyback LED driver. Several effects, such as the distortion caused by the ringing current, crossover distortion due to transformer leakage inductance and crossover distortion due to the input storage capacitor have been experimentally reported. These effects, not previously studied for a high power factor (Hi-PF) QR flyback, have been analyzed in depth. Finally, some practical design guidelines for a Hi-PF QR flyback driver for LED applications are provided.

Energy-saving lamps are equipped with converters enabling high energy efficiency at the cost of injecting very distorted currents on the mains. The problem is more complex in the emerging smart-lighting scenario where these lamps are also used to perform additional tasks. Harmonics mitigation at the lamp level is expensive; consequently, an optimal lighting system design aiming at reducing both costs and current distortion of the whole lighting system is necessary. A tool able to emulate the current drawn from the lamps is necessary for optimal design. Such a tool has also to consider the fluctuations of the voltage on the mains that usually occur throughout the day. In this perspective, a parametric PSpice circuit is proposed and the netlist is reported in this work. Moreover, the simple procedure to be adopted for computing the parameters is also described. The validation has confirmed the ability of the proposed circuit in emulating the current drawn from various CFLs and LED lamps under different supplying voltage.