Jiaming Zhang

Dr. Jiaming Zhang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 October 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PQPeicheng Qiu
Peicheng Qiu
FLfei liu
fei liu
JZJiaming Zhang
Jiaming Zhang
Land subsidence is a prevalent geological issue that poses significant challenges to construction projects. Consequently, the accurate prediction of land subsidence has emerged as a focal point of research among scholars and experts. Traditional mathematical models exhibited certain limitations in forecasting the extent of land subsidence. To address this issue, the sparrow search algorithm (SSA) was introduced to optimize the efficacy of the long short-term memory (LSTM) neural network in land subsidence prediction. This prediction model has been successfully applied to the Huanglong Commercial City project in the Guanghua unit of Wenzhou city, Zhejiang province, China, and has been compared with the predictions of other models. Using monitoring location 1 as a reference, the MAE, MSE, and RMSE of the test samples for the LSTM neural network optimized using the SSA are 0.0184, 0.0004, and 0.0207, respectively, demonstrating a commendable predictive performance. This new model provides a fresh strategy for the land subsidence prediction of the project and offers new insights for further research on combined models.

8 November 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PGPengzheng Guo
Pengzheng Guo
JZJiaming Zhang
Jiaming Zhang
FLfei liu
fei liu
文刘文连 刘
文连 刘
ZWZhiqiang Wang
Zhiqiang Wang
JCJipu Chen
Jipu Chen
In order to have a better understanding of the shear creep characteristics of muddy interlayer in unstable landslides, we took the more “inferior” clay muddy interlayer as the research object, and shear creep experiments under different normal stress levels were carried out by means of hierarchical loading. This paper focuses on the variation law of creep curve and its long-term strength in the clay-type muddy interlayer under different normal stresses. The results showed that the creep characteristics of clay-type muddy interlayer were obvious: at the same normal stress level, instantaneous deformation, initial creep and stable creep appeared at lower shear stress level; at the level of rupture shear stress, there were two cases: the creep curve included three stages of typical initial creep, stable creep and accelerated creep failure, or directly entered the accelerated creep stage until the specimen’s failure. The average shear and stable creep rate of the muddy interlayer specimen increased exponentially with the increase in shear stress. The empirical formula u = u0 + A [1 − e(−Bt)] + Ctn of shear strength could better reflect the creep deformation law of muddy interlayer, and the correlation coefficient R2 varies from 0.90 to 0.99. Based on the definition of long-term ultimate strength, the long-term strength of clay-type muddy interlayer was determined.

1 January 2024 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
FLfei liu
fei liu
JZJiaming Zhang
Jiaming Zhang
PGPengzheng Guo
Pengzheng Guo
WLWenlian Liu
Wenlian Liu
ZWZhiqiang Wang
Zhiqiang Wang
JCJipu Chen
Jipu Chen
In China, slope engineering occasionally faces landslides in rocky slopes containing muddy interlayers, primarily triggered by excavation activities. These incidents lead to considerable human casualties and substantial economic losses. However, existing studies predominantly concentrate on the excavation‐induced impacts on the stability of rocky slopes characterized by single‐layered soft and weak interlayers. Conversely, reports on how excavation influences the stability of bedding cataclastic rock mass high slope containing multimuddy interlayers remain notably absent in the literature. Moreover, unloading due to excavation can swiftly compromise the mechanical integrity and overall quality of the rock mass, consequently impacting the stability of slopes postexcavation. Therefore, this paper modeled the unstable slope excavated at a waste incineration power plant in Yuxi, Yunnan, using the finite element strength reduction method. This approach was employed to comprehensively simulate the entire process of artificial multilevel excavation in a bedding cataclastic rock mass high slope containing multimuddy interlayers. This study investigated the impact of multilevel artificial excavation on slope stability by thoroughly considering factors including alterations in slope morphology, unloading effects, and the degradation of geotechnical parameters. The research yielded the subsequent conclusions. Multimuddy interlayers were the key to the slope’s instability. For slopes subjected to such multilevel excavation, efforts were made to minimize the exposure of muddy interlayers. Slopes above exposed muddy interlayers did not require additional support, while those below needed prioritized reinforcement. The likely instability mode of the actual slope was local destabilization leading to landslides. Furthermore, when using numerical simulation methods to study the impact of excavation disturbances on the stability of such slopes, it was necessary to consider the deterioration of geotechnical parameters to obtain results more reflective of actual conditions. These research findings provided valuable theoretical and empirical support for studies on similar excavated slopes.

17 February 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MCMao Chen
Mao Chen
JZJiaming Zhang
Jiaming Zhang
PQPeicheng Qiu
Peicheng Qiu
FLFei Liu
Fei Liu
Clay-type muddy interlayer is a key control factor leading to the instability of layered slopes, and it is of great significance to carry out the research on the shear characteristics of clay-type muddy interlayer for the safety and stability of layered slope projects. In this paper, the shear characteristics of clay-type muddy interlayer under different conditions of dry density and water moisture content are investigated by improving the test apparatus and data processing method. The results show that: the internal friction angle of clay-type muddy interlayer decreases with the increase of dry density under the condition of low moisture content, while the cohesion increases with the increase of dry density; at medium moisture content, both of them fluctuate with the dry density, but the amplitude is not large; at high moisture content, the response effect with dry density is not obvious. Therefore, higher dry density improves the shear properties of the soil by strengthening the friction and occlusion between particles, while increasing moisture content tends to weaken the shear properties, mainly due to the reduction of the lubrication effect of water, which gradually reduces the cementation between soil particles and the force of water film connection. On the one hand, the research results can enrich the complex mechanical response mechanism of clay-type muddy interlayer in different conditions, and on the other hand, it also provides a certain theoretical basis for the disaster prevention and early warning assessment of this kind of slope engineering.

9 June 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LTLin Tian
Lin Tian
文刘文连 刘
文连 刘
JZJiaming Zhang
Jiaming Zhang
HGHaiyan Gao
Haiyan Gao
The dolomite rock mass on the slope of the Yanhe domestic waste incineration power plant was used as the research object. The macro- and micro-structural characteristics of intact rock blocks and rock discontinuities were analyzed qualitatively and quantitatively using in-hole television, wave velocity testing, three-dimensional laser scanning techniques, photogrammetry, image processing techniques, and scanning electron microscopy (SEM). The study shows that the degree of fracturing generally decreases with depth over the exposed borehole depth range, and the rock masses are generally very fractured. The wave velocity of dolomite generally increases with the depth of the borehole, and the integrity of the dolomite is either broken or extremely broken. The excavation profile reveals six sets of discontinuities and joints that are straight, smooth, interconnected, and largely unfilled. The angles of the structural bodies of different grain sizes are sharp, with roundness being angular and sharp-angled. The smaller the blocks, the more complex the surface morphology. SEM observations show that the ultramicroscopic fractures are not flat and smooth, and the fractures are folded. Fracturing mainly occurs along intercrystalline and crystal interfaces. These fracture features suggest that the fracturing of dolomite is mainly related to the original sedimentary construction and tectonism.

21 July 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PQPeicheng Qiu
Peicheng Qiu
YLYunkai Long
Yunkai Long
JZJiaming Zhang
Jiaming Zhang
Based on the excavated slope of a waste incineration power plant in Yuxi, Yunnan Province, China, the finite element strength reduction method was used to investigate the variation rules of the safety factor, displacement, and deformation of the bedding cataclastic rock slope containing multi-muddy interlayers under the different conditions of number of muddy interlayers n, inclination angle θ, cohesion c, and angle of internal friction φ. Moreover, the deformation failure mechanism and stability of bedding cataclastic rock slope containing multi-muddy interlayers were revealed. The results showed that, as n increased, the maximum horizontal displacement of the slope increased, the factor of safety decreased, and the key influence on the stability of the slope was the muddy interlayers through the toe of the slope. As θ increased, the horizontal displacement of the slope first increased, then decreased, and then increased again, the safety factor first decreased, then increased, and then decreased again, and the stability of the upright laminar slope was slightly larger than that of the horizontal laminar slope. When the slope angle β was 45°, with the increase in θ, the failure mechanism of the slope manifested as a compression-shear failure, traction-sliding failure, traction-sliding-bending-shear failure, flexural deformation, and bending-buckling-collapse failure in sequence. As c increased, the slope evolved from traction-sliding failure to traction-sliding-bending-shear failure; the stability of the slope increased as c and φ increased.