This study investigates the effect of a new type of blended pozzolan on the hydration, mechanical and durability performance of cement. A blend of limestone calcined clay pozzolan (LCCP) was produced by grinding calcined clay and limestone in a ratio of 2 : 1 with 2% gypsum. Blends with cement replacement level of 0, 10, 15, 20, 30 and 50% using LCCP were cast. The effect of LCCP on the hydration of cement was investigated using isothermal calorimetry and X-ray diffraction. Mortar and concrete samples were cast to study the influence of LCCP on mechanical and transport properties. The addition of LCCP was found to have a beneficial effect on the early age hydration of cement. The induction period and initial setting time of cement paste were found to reduce on increased cement replacement level. Higher or similar compressive strength was observed for all the LCCP blends as compared to ordinary Portland cement. The pozzolanic reaction of calcined clay and formation of carboaluminates on the reaction of calcium carbonate with alumina helps to develop a refined pore structure that aids in reducing transport properties of concrete such as porosity, rate of water absorption and permeability.
The reduction of the clinker factor in cement has emerged as the most promising solution to reduce carbon dioxide (CO2) emissions and to improve sustainability. Limestone calcined clay cement (LC3) is a ternary cement where the synergy between calcined clay and limestone allows the reduction of clinker factors to 0·5. In order to understand practical issues in the production of LC3, such as the selection of raw material and production conditions, industrial production of LC3 has been carried out at three locations in India. A wide range of raw materials was collected from various parts of India and characterised to evaluate their suitability for the production of LC3. Both static and rotary calciners were used for the production of calcined clay. Open- and closed-circuit ball mills were used. Limestones with various impurities and compositions were utilised. It has been observed that lower-grade clay and limestone can be used and that the quality control during the production process can be carried out using widely available techniques. Field trials have shown that the cement can be used without any changes to the existing construction methodologies. This paper discusses the key lessons and insights gained from these trial productions.