Cyclists are one of the main categories of road users particularly exposed to accident risk. The increasing use of this ecological means of transport requires a specific assessment of cyclist safety in terms of traffic flow and human factors. In this study, a particular visual tracking tool has been used to highlight not only the main critical points of the infrastructure, where a high level of distraction is recorded, but also the various interactions with different road users (pedestrians, vehicles, buses, wheelchairs, cyclists). To confirm the critical aspects of the infrastructure and the trend of workload, a similar circuit was reproduced in a bicycle simulator, which also allowed a meaningful comparison of cycling behaviour. The innovative component of this paper is a comparison between a real test, held in Stockholm, and a simulator where the same scenario has been represented, in order to highlight the objective differences in behaviour. The cycling performance was also evaluated both from an objective point of view, with the count of frames related to each category of visualization, and from a subjective one, through the questionnaires. The results show the crossing as a critical aspect because only 4/3% fixation is required for both simulated and real tests to confirm the significance of the comparison between the two experiments. The high attention rate, resulting from frame-by-frame analysis, also points to a clear difference in the perception of users, who feel with a low workload.
Road traffic accidents represent a significant public health care, having a serious impact on collective well-being especially in extra-urban areas. So, the academic research is increasingly focusing on this question and examining it from different perspectives. In this paper an extra-urban Italian motorway has been considered and its risk associated with traffic safety has been evaluated through an in-depth analysis of its accident database. It has been evaluated in order to assess the influence of certain factors on the accidents’ severity and frequency. The factors included are road geometry, surface conditions, accident nature, and human behaviour. The statistical analysis of these elements has been integrated with a field experiment, with a total of 21 participants involved, to assess the user level of distraction and vehicle kinematic data in the selected area, through innovative instruments as an Eye Tracking and a Vbox Pro Video. The obtained results revealed that drivers’ behaviour had a more significant impact on accident severity than the road geometric characteristics. Congestion is the primary risk factor for accidents, prompting users to adopt erratic driving behaviours, high speeds and hight levels of inattention.
Cyclists are one of the main categories of road users particularly exposed to accident risk. The increasing use of this ecological means of transport requires a specific assessment of cyclist safety in terms of traffic flow and human factors. In this study particular visual tracking tool has been used in order to highlight not only the main critical points of the infrastructure, where a high level of distraction is recorded but also the various interactions with different road users (pedestrians, vehicles, buses, wheelchairs, cyclists). In order to confirm the critical points of the infrastructure and the trend of workload, a similar circuit was reproduced in a bicycle simulator, which also allowed a meaningful comparison of cycling behaviour. The cycling performance was also evaluated both from an objective point of view, with the count of frames related to each category of visualization, and a subjective one, through the questionnaires. The results show the crossing as a critical point because of only 4/3% fixation for both simulated and real tests in order to confirm the significance of the comparison between the two experiments. The high attention rate resulting from frame-by-frame analysis also points to a clear difference in the perception of users, who feel with a low workload.
The visibility of vertical road signs is a crucial factor for driving safety, especially in low-light conditions. The retroreflectivity of signs is imperative to ensure that drivers are able to perceive the information in a timely manner. However, the effectiveness of signs can be compromised by factors such as material degradation, wear and tear, and dirt on the surface. The objective of this study is to analyze how different surface conditions and different levels of retroreflectivity of vertical signs affect users’ perception and driving behavior in a real controlled environment. A total of twenty-five volunteers undertook the same road test twice. During the initial trial, the subjects encountered signs with a Class II retro-reflective film (EN 12899-1:2007), and during the second trial, they encountered the same signs in the same positions as the first trial but with varied characteristics and additional factors such as dirt, water, and degradation. Through a Mobile Eye Tracker and a Racelogic Video Vbox, it was possible to investigate the alterations in the visual and kinematic behavior of participants across the two tests. The statistical analysis was conducted using the Wilcoxon test, Spearman’s correlation and regression analysis. The analysis revealed that the signal with a dirty surface had the most significant impact on participants’ perception, showing a substantial reduction in the distance of the first fixation (−15%), a decrease in the number of fixations (−37%), and an increase in the time required for it to be perceived (+40%). This study demonstrates that the maintenance of road sign surfaces is a critical factor in their effectiveness and is as influential as the level of retroreflectivity of the material.
Adaptive Cruise Control (ACC) is useful in the most dangerous maneuvers such as braking and acceleration. This study assesses how ACC modifies traffic flows by analysing the differences be-tween manual and autonomous driving in connected and autonomous vehicles (CAVs). Using a platoon of 80 vehicles, tested in pairs on the road, it was possible to define the speed trends during braking and acceleration and the reaction times to the driving maneuvers (PRT, TH, TCC) with a kinematic data detector. The interactions between the CAV and the driver, have been studied in-novatively, i.e through gaze analysis. Situations of potential danger, characterized by the braking of the vehicle that precedes the car with the driver equipped with the eye tracker tool, have been recreated, considering the influence of the driver’s ACC experience. Results statistically confirmed that with the ACC switched on the reaction times are greater than manual driving (2.4/3.8 sec); this can lead to a reduction in road safety, further motivated by the rapid decrease in speed. The interpolation between automated and human data, finally, has allowed the detection of some criticalities of the system that are fundamental in order to reach the second level of automation.