This paper introduces a novel soft sensor modeling method based on BDA-IPSO-LSSVM designed to address the issue of model failure caused by varying fermentation data distributions resulting from different operating conditions during the fermentation of different batches of Pichia pastoris. First, the problem of significant differences in data distribution among different batches of the fermentation process is addressed by adopting the balanced distribution adaptation (BDA) method from transfer learning. This method reduces the data distribution differences among batches of the fermentation process, while the fuzzy set concept is employed to improve the BDA method by transforming the classification problem into a regression prediction problem for the fermentation process. Second, the soft sensor model for the fermentation process is developed using the least squares support vector machine (LSSVM). The model parameters are optimized by an improved particle swarm optimization (IPSO) algorithm based on individual differences. Finally, the data obtained from the Pichia pastoris fermentation experiment are used for simulation, and the developed soft sensor model is applied to predict the cell concentration and product concentration during the fermentation process of Pichia pastoris. Simulation results demonstrate that the IPSO algorithm has good convergence performance and optimization performance compared with other algorithms. The improved BDA algorithm can make the soft sensor model adapt to different operating conditions, and the proposed soft sensor method outperforms existing methods, exhibiting higher prediction accuracy and the ability to accurately predict the fermentation process of Pichia pastoris under different operating conditions.

This paper proposes a novel soft sensor modeling approach, MIC-TCA-INGO-LSSVM, to address the decline in performance of soft sensor models during the fermentation process of Pichia pastoris, caused by changes in working conditions. Initially, the transfer component analysis (TCA) method is utilized to minimize the differences in data distribution across various working conditions. Subsequently, a least squares support vector machine (LSSVM) model is constructed using the dataset adapted by TCA, and strategies for improving the northern goshawk optimization (INGO) algorithm are proposed to optimize the parameters of the LSSVM model. Finally, to further enhance the model’s generalization ability and prediction accuracy, considering the transfer of knowledge from multiple-source working conditions, a sub-model weighted ensemble scheme is proposed based on the maximum information coefficient (MIC) algorithm. The proposed soft sensor model is employed to predict cell and product concentrations during the fermentation process of Pichia pastoris. Simulation results indicate that the RMSE of the INGO-LSSVM model in predicting cell and product concentrations is reduced by 47.3% and 42.1%, respectively, compared to the NGO-LSSVM model. Additionally, TCA significantly enhances the model’s adaptability when working conditions change. Moreover, the soft sensor model based on TCA and the MIC-weighted ensemble method achieves a reduction of 41.6% and 31.3% in the RMSE for predicting cell and product concentrations, respectively, compared to the single-source condition transfer model TCA-INGO-LSSVM. These results demonstrate the high reliability and predictive performance of the proposed soft sensor method under varying working conditions.