The gas–solid flow of mixed seeds of oat and vetch in the air-blowing venturi tube was simulated numerically by means of a coupling approach of the discrete element method (DEM) and computational fluid dynamics (CFD). In the gas–solid coupling model, EDEM software was used to depict the discrete particle phase, and ANSYS Fluent software was used to describe the continuous gas phase. The effects of the seed entry angle and inlet air velocity on the uniformity of mixed seed supply were studied and analyzed from the angle of airflow field variation and mixed seeds movement characteristics. The simulation results showed that the seeding angle has a great influence on the seed movement in the tube and affects the pressure and velocity gradient of the airflow field. If the seed insertion angle is too large, the number of collisions between the seed and the tube wall will increase, and the phenomenon of seeds retention and disordered jumping will occur. The inlet air velocity mainly affects the outlet air velocity and seed velocity and has little effect on the change in airfield. With the increase in inlet air velocity, the greater the velocity and force of the seeds, the closer the mixed seeds collide with the wall to the outlet pipe. At high inlet airflow velocity, there is a great disparity in the movement speed between the seeds, resulting in uneven spacing between the seeds. The results showed that under the conditions of 60° seed entry angle and 35~40 m/s inlet air velocity, the airflow field distribution in the tube was uniform and the seed movement was continuous and uniform.

To analyze the interaction between the surface soil and the soil-contacting component (65 Mn) in the camellia oleifera forest planting area in Changsha City, Hunan, China, in this study, we conducted discrete element calibration using physical and simulation tests. The chosen contact model was Hertz–Mindlin with JKR cohesion, with the soil repose angle as the response variable. The repose angle of the soil was determined to be 36.03° based on the physical tests. The significant influencing factors of the repose angle determined based on the Plackett–Burman test were the soil–soil recovery coefficient, soil–soil rolling friction coefficient, soil-65 Mn static friction coefficient, and surface energy of soil for the JKR model. A regression model for the repose angle was developed using the Box–Behnken response surface optimization method to identify the best parameter combination. The optimal parameter combination for the JKR model was determined as follows: surface energy of soil: 0.400, soil–soil rolling friction coefficient: 0.040, soil-65 Mn static friction coefficient: 0.404, and soil–soil recovery coefficient: 0.522. The calibrated discrete element parameters were validated through experiments on the repose angle and steel rod insertion. The results indicated that the relative errors obtained from the two verification methods were 2.44% and 1.71%, respectively. This research offers fundamental insights for understanding the interaction between soil and soil-contacting components and optimizing their design.

Pre-sowing treatment of seeds by plasma can improve seed vigor and promote seed germination and growth. To solve the problems of low processing volume and uneven treatment in plasma seed treatment devices, according to the process scheme of medium-blocking discharge plasma seed treatment, a medium-blocking discharge vibration-uniform material plasma seed treatment device was designed, the structure and working principle of the vibration-uniform material device were systematically analyzed, and the mathematical model of seed force was established. According to electromagnetic vibration theory, the seed sorting and conveying principles were analyzed in the lower trough, and the relevant parameters were selected and calculated. Using EDEM discrete element simulation software, a numerical simulation of alfalfa seed feeding and vibration-uniform material process was carried out. A three-factor, three-level orthogonal test was established. The results showed that the vibration amplitude and groove shape significantly affected the coefficient of variation of seed uniformity on the groove during the seed feeding and vibration-uniform material processes, and the groove wheel speed had a certain effect on the coefficient of variation of uniformity. The main order of factors affecting the uniformity of seed spreading was vibration amplitude B > notch shape C > speed A. The optimal speed was 35 r/min, the optimal notch shape was circular, and the optimal vibration amplitude was 0.55 mm.

To investigate the impact of different cutter structures on the crushing effect of forage stalks at various rotational speeds, this study designed five types of crushing cutters. The effects of cutter structure and rotational speed on the crushing effect of the forage crusher were examined using the discrete element method, a single-factor test. An orthogonal test was conducted, with the percentage of bond breakage as the evaluation index, and tool type and tool speed as influencing factors. The results of the orthogonal test were analyzed using range analysis. The findings revealed that the quality of alfalfa stalk crushing varied depending on the crushing structure and rotational speed. Within a certain rotational speed range, the crushing effect improved as the rotational speed increased. However, beyond a certain value, the improvement in the crushing effect became slower. Notably, the hob-type crushing structure exhibited the best crushing effect at 2400 r/min.

Plasma seed pretreatment is an important means to rapidly improve seed quality. The studies on plasma-generating devices suitable for continuous seed pretreatment at atmospheric pressure have been relatively limited. Gliding arc discharge can generate atmospheric pressure plasma at room temperature, which provides a new way to use plasma to treat seeds at ambient temperature and pressure. By analyzing the influence of structural characteristics, such as gliding arc electrode shape, discharge distance, and electrode opening angle on plasma distribution, a plasma seed treatment method based on negative pressure guidance was proposed, and the electrode structure was optimized. The results show that the reasonable matching of electrode structure parameters can improve the gliding arc guiding ability of the discharge electrode. Comparing the three electrode shapes, it was found that the triangular electrode had the best gliding arc guiding ability, and it had the potential to further increase the plasma size with the increase in the electrode size. The discharge distance and electrode opening angle had a significant impact on the gliding arc guiding ability of the discharge electrode. When the discharge distance was 15 mm and the electrode opening angle was 76°, the structure parameters of the plasma seed treatment electrode were matched with each other, and the best processing capacity was achieved. After 10 s of gliding arc plasma treatment with the optimized triangular electrode structure, the seed germination rate and germination index of Leymus chinensis ((Trin.) Tzvel) increased by 33.3% and 13.8%. This study provides a theoretical basis for the design and optimization of gliding arc electrode structures and serves as a reference for the research and development of plasma generators for continuous seed treatment at atmospheric pressure.

Background: Astragalus membranaceus seeds have dormant properties that not only limit germination but also negatively affect the growth of seedlings. We investigated the enhancing effect of cold plasma treatment on seed germination and the positive effect on seedling growth of Astragalus membranaceus by treating its seeds with cold plasma at different power levels. Method: The Astragalus membranaceus seeds were treated with cold plasma at power levels of 40, 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240 W for 15 seconds with helium gas and seeds without any treatment were used as control. Results: The Astragalus membranaceus seeds were treated with cold plasma, which not only improved seed germination, but also had a positive effect on seedling growth, with the best results for the 80 W power cold plasma treatment. The 80 W power cold plasma treatment increased the germination rate, germination index and vigor index of Astragalus membranaceus seeds by 26.8%, 12.4% and 39.8%, respectively; increased root length, CAT activity and SOD activity of Astragalus membranaceus seedlings by 24.5%, 99.7% and 7.1%, respectively and decreased the relative conductivity and MDA content of Astragalus membranaceus seedlings by 6.6% and 17.6%, respectively; compared with that of the control group.