This paper presents a novel high-power rotary waveguide phase shifter based on circular polarizers specifically engineered for high-power microwave (HPM) applications. The phase shifter is capable of performing a precise 360° linear phase shift through rotation and consists of three parts: a linearly polarized to left-handed circularly polarized (LP-LHCP) mode converter, a left-handed to right-handed circularly polarized (LH-RHCP) mode converter, and a linearly polarized to right-handed circularly polarized (LP-RHCP) mode converter. This paper analyzes the phase-shifting principle, optimizes the three parts of the X-band rotary waveguide phase shifter, and conducts simulation studies on the entire phase shifter, which is made of aluminum. The results show that the reflection is less than −20 dB and the insertion loss is below 0.3 dB within 9.5 GHz to 10.2 GHz. The phase shift is equal to twice the rotation angle within this frequency range. Specifically, the phase shifter can achieve a linear phase shift of 360° when rotated from 0° to 180°, with a maximum deviation of less than 1.2°. Moreover, the power-handling capacity of the phase shifter in vacuum exceeds 242 MW. In the meantime, a prototype of a phase shifter was manufactured, and the experimental results are in good agreement with the simulation results.
This paper presents a novel high-power rotary waveguide phase shifter based on circular polarizers specifically engineered for high-power microwave (HPM) applications. The phase shifter is capable of performing a precise 360° linear phase shift through rotation and consists of three parts: a linear polarized to left-handed circular polarized (LP-LHCP) mode converter, a left-handed to right-handed circular polarized (LH-RHCP) mode converter, and a linear polarized to right-handed circular polarized (LP-RHCP) mode converter. The paper analyzes the phase shifting principle, optimizes the three parts of the X-band rotary waveguide phase shifter, and conducts simulation studies on the entire phase shifter made of aluminum. The results show that the reflection is less than -20dB and the transmission efficiency is over 95% within 9.5GHz to 10.2GHz. The phase shift has a linear relationship with the rotation angle by a factor of two within this frequency range. Specifically, the phase shifter can achieve a linear phase shift of 360° when rotated from 0° to 180°, with a maximum deviation of less than 1.2°. Moreover, the power-handling capacity of the phase shifter in vacuum exceeds 242mW.
1 October 2024 in Review of Scientific Instruments
A broadband polarization-adjustable antenna realized by two waveguide circular polarizers is proposed in this paper. The antenna consists of a rectangular-to-circular transition waveguide, two identically structured rectangular slot circular polarizers, and a conical horn, all connected in sequence. By rotating the two circular polarizers to specific angles, the antenna can switch among four polarization modes: horizontal polarization, vertical polarization, left-hand circular polarization, and right-hand circular polarization. The antenna polarization adjustment principle is thoroughly analyzed. Taking the X-band polarization-adjustable antenna as an example, simulation and optimization were performed, and a prototype was fabricated and measured. The antenna’s reflection coefficient is below −18 dB across all polarization modes from 9.2 to 10 GHz. In linear polarized modes, gains exceed 10.5 dBi. For circular polarized modes, the gains align with those of linear modes, with an axial ratio of less than 1 dB in the operating frequency band. The measured results are consistent with the simulation results, confirming its excellent polarization adjustment performance and potential for high power microwave applications.
1 January 2026 in IEEE Microwave and Wireless Technology Letters
A new topology to excite the circular TM01 mode for high-power microwave (HPM) research is provided. Three important innovations enhance its transmission performance: a four-aperture sidewall coupling structure for parasitic mode suppression, an intermediate coaxial TEM mode stage for bandwidth extension, and a four-way stacked power divider for compactness. Measurement results show that within the frequency range of 7.5–11.5 GHz (relative bandwidth of about 42.1%), the converter exhibits an insertion loss less than 0.4 dB, a return loss better than 15 dB, and a mode purity higher than 96.7%. The converter features broad bandwidth, high conversion efficiency, and high mode purity, making it suitable for cold-test experiments of HPM sources and high-power transmission components.
In this paper, the transmission characteristics of microwave narrow pulse in waveguide devices are analyzed in time domain using scattering matrix cascade and microwave network theory, which can provide theoretical guidance and reference for the design of narrow pulse waveguide devices. The physical process of electromagnetic wave passing through the waveguide device is analyzed theoretically. The results show that when there are two discontinuous surfaces in the waveguide device, scattering and linear superposition will occur every time the electromagnetic wave propagates to the discontinuous surface. As the process continues, the electromagnetic wave propagating in all directions will gradually tend to steady state. Therefore, even if the total scattering parameter S 21 of the waveguide device is equal to 1, the peak power of the narrow microwave pulse may be affected because of its short pulse width. Based on the theoretical results, the relationship between the group velocity of electromagnetic wave in waveguide, the discontinuity of waveguide devices and the peak power of microwave narrow pulse is given.Finally, the validity of the theoretical analysis method is verified by simulation.