This study focuses on a small agricultural diesel engine fueled with B20 (20% biodiesel and 80% diesel by volume) blend fuel in a plateau area. The combustion chamber’s structural parameters and fuel injection angle were taken as variables at peak torque conditions. First, a full factorial design was used for experimental design. Second, the back-propagation (BP) neural network was employed to predict the indicated thermal efficiency and the indicated specific NOx emission. Third, the non-dominated sorting genetic algorithm-II (NSGA-II) was utilized to optimize the indicated thermal efficiency and the indicated specific NOx emission. Finally, the technique for order of preference by similarity to ideal solution (TOPSIS) method was applied to obtain optimal solutions, and a three-dimensional numerical simulation was conducted to verify the optimization results. The optimization results indicate that the shape characteristics of the combustion chamber have a certain influence on the engine’s performance. The optimized design significantly reduces NOx emissions, by 22.83%, compared to the original engine, whilst maintaining the engine’s performance.
Locomotive diesel engines remain necessary for non-electrified railway services, shunting, and emergency operations, motivating efforts to reduce fuel use and exhaust emissions. This study combined combustion chamber selection with injection and intake optimization for a locomotive diesel engine. Three bowl designs were evaluated using a three-dimensional CFD model in AVL FIRE at 1200 r/min under high load; the model was validated against global pressure, heat release, and emission measurements for the baseline configuration at this same operating condition. The deep ω-shaped chamber provided the best overall predicted performance and was retained for subsequent optimization. A Latin hypercube design generated 240 cases spanning nozzle hole diameter and count, spray included angle, injection timing, intake pressure, and EGR rate. CFD responses were used to train a backpropagation neural network, after which NSGA-II and TOPSIS were applied under a 23 MPa peak-pressure constraint. At this single operating point, CFD re-evaluation of the selected compromise predicted reductions of 1.92%, 68.28%, and 29.27% in BSFC, NOx, and soot, respectively, relative to the baseline, with a peak pressure of 22.54 MPa. The model-resolved fields further suggested smaller fuel-rich regions and reduced late-combustion high-temperature and pollutant-accumulation regions. These spatial observations are model-dependent because spatially resolved validation is unavailable and the RANS/ECFM-3Z framework does not resolve the detailed near-wall flame and quenching structure. The reported improvements therefore apply only to the investigated operating point and design space.
Reliable state of health (SOH) estimation plays an important role in the safe and stable operation of lithium-ion battery energy storage systems. Nevertheless, the nonlinear degradation characteristics and complex aging behaviors of batteries hinder accurate SOH estimation. This study proposes a Whale Optimization Algorithm (WOA)-optimized Convolutional Neural Network (CNN)–Temporal Convolutional Network (TCN)–Temporal Pattern Attention (TPA) framework for lithium-ion battery SOH estimation. Multiple health factors are extracted from charge–discharge curves to characterize battery degradation behaviors. Neighborhood-based imputation and Hampel-Median Absolute Deviation (MAD) correction are employed to handle missing values and local outliers, while Pearson correlation analysis is applied to evaluate the relevance of extracted features. CNN module captures local degradation patterns, TCN module learns long-term aging dependencies, and TPA mechanism enhances the representation of critical degradation stages. Furthermore, WOA adaptively optimizes key hyperparameters to improve model performance and robustness. The proposed framework is validated using NASA and CALCE battery datasets. Experimental results demonstrate that, compared with the CNN-TCN model, the proposed method reduces RMSE by 7.49–50.81% on NASA datasets and 15.83–60.38% on CALCE datasets, achieving higher estimation accuracy and stability.
About Me
Jun Wang,Doctor,Associate professor,master supervisor
Jun Wang,Doctor,Associate professor,master supervisor