Herein, we explore the supercapacitor and photocatalytic applications of poly(1-naphthylamine) (PNA) nanoparticles. The PNA nanoparticles were synthesized by using polymerization of 1-naphthylamine and characterized with several techniques in order to understand the morphological, structural, optical and compositional properties. The structural and morphological properties confirmed the formation of crystalline nanoparticles of PNA. The Fourier-transform infrared (FTIR) spectrum revealed the successful polymerization of 1-naphthylamine monomer to PNA. The absorption peaks that appeared at 236 and 309 nm in the UV–Vis spectrum for PNA nanoparticles represented the π–π* transition. The supercapacitor properties of the prepared PNA nanoparticles were evaluated with cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) methods at different scan rates and current densities, respectively. The effective series resistance was calculated using electrochemical impedance spectroscopy (EIS), resulting in a minimum resistance value of 1.5 Ω. The highest specific capacitance value of PNA was found to be 255 Fg−1. This electrode also exhibited excellent stability with >93% capacitance retention for 1000 cycles, as measured at 1A g−1. Further, the prepared PNA nanoparticles were used as an effective photocatalyst for the photocatalytic degradation of methylene blue (MB) dye, which exhibited ~61% degradation under UV light irradiation. The observed results revealed that PNA nanoparticles are not only a potential electrode material for supercapacitor applications but also an efficient photocatalyst for the photocatalytic degradation of hazardous and toxic organic dyes.
The development of sustainable, high-performance electrode materials is essential for scalable energy storage devices. A key challenge lies in developing cost-effective systems that combine high energy and power densities. Vanadium dioxide (VO2) with its remarkable pseudo-capacitive behaviour emerges as a promising candidate owing to its polymorphic forms, and unique phase transition property. Herein, VO2 polymorphs (A, B, D, and M) were hydrothermally synthesized and systematically investigated. Among them, VO2(M) micro-rods exhibited a superior electrochemical performance, delivering specific capacitance of 150 F g-1 at 1 A g-1 current density and demonstrating 99 % of capacitive contribution at 40mV/s, as confirmed by kinetic studies. Furthermore, an, asymmetric hybrid supercapacitor employing VO2(M) micro-rods as the positive electrode and Ti3C2Tx MXene as the negative electrode achieved remarkable energy storage performance, delivering specific capacitance of 92.8 F g-1 at 2 A g-1. The device delivered a maximum energy density of 68.18 Wh kg-1 and power density of 2298.2 W kg-1, while maintaining 100 % capacitive retention and coulombic efficiency over 5000 cycles. The high capacitive contribution observed in both pristine VO2(M) and the asymmetric VO2(M)//Ti3C2 system highlights their potential as promising electrode material for the next generation energy storage technologies.