Bio-based bulk chemicals such as carboxylic acids continue to struggle to compete with their fossil counterparts on an economic basis. One possibility to improve the economic feasibility is the use of crude substrates in biorefineries. However, impurities in these substrates pose challenges in fermentation and purification, requiring interdisciplinary research. This work demonstrates a holistic approach to biorefinery process development, using itaconic acid production on thick juice based on sugar beets with Ustilago sp. as an example. A conceptual process design with data from artificially prepared solutions and literature data from fermentation on glucose guides the simultaneous development of the upstream and downstream processes up to a 100 L scale. Techno-economic analysis reveals substrate consumption as the main constituent of production costs and therefore, the product yield is the driver of process economics. Aligning pH-adjusting agents in the fermentation and the downstream process is a central lever for product recovery. Experiments show that fermentation can be transferred from glucose to thick juice by changing the feeding profile. In downstream processing, an additional decolorization step is necessary to remove impurities accompanying the crude substrate. Moreover, we observe an increased use of pH-adjusting agents compared to process simulations.
3 February 2026 in Biotechnology for Biofuels and Bioproducts
Background: The growing demand for sustainable alternatives to fossil-based chemicals has increased interest in platform chemicals derived from renewable biomass sources, such as malic acid. This C4 dicarboxylic acid is valued for its diverse application potential in food, pharmaceuticals, and bioplastics. Sustainable platform chemicals remain commercially uncompetitive primarily due to high production costs driven by high substrate costs. Microbial production using more cost-effective feedstocks like sugar beet molasses shows promise. However, it faces challenges from high osmolality, growth inhibitors, and predetermined substrate composition during fermentation, as well as elevated pigmentation that complicates downstream processing. Moreover, the separation techniques typically used for highly polar carboxylic acids face considerable yield limitations due to the high solubility of malic acid and its salts. Results: This study developed an all-encompassing production process for malic acid from untreated sugar beet molasses. Fermentative malic acid production with Ustilago trichophora was investigated in batch, fed-batch, and pulsed batch in shake flask scale, followed by a scale-up into 150 L pilot scale. A total of 15.7 kg malic acid was produced in a repeated pulsed batch with membrane-based cell retention with a titer of 108 g/L, a yield of 0.50 g/g, and a space–time yield of 0.66 g/L/h (max. 1.1 g/L/h). In addition, the byproduct succinic acid was detected in concentrations of up to 22.9 g/L. In the subsequent downstream processing, activated carbons were used for two-stage product capture, solvent change, and decolorization, followed by crystallization of the products malic acid and succinic acid. Based on experimental results, an Aspen Plus model was developed to estimate the overall process yields of 0.43 g malic acid (98% purity) and 0.10 g succinic acid per gram sucrose equivalent. A techno-economic analysis suggests production costs within the range of current market prices. Conclusion: Agricultural residue streams are often proposed as cost-effective alternatives for fermentative platform chemical production, although the challenges addressed hamper the direct transfer of process strategies from established organic acid production. By presenting a holistic approach explicitly tailored to malic acid production from untreated molasses, this work demonstrates the techno-economic feasibility of the developed process at a meaningful scale.