Although wireless fingerprinting has been well researched and widely used for indoor localization, its performance is difficult to quantify. Therefore, when wireless fingerprinting solutions are used as location updates in multi-sensor integration, it is challenging to set their weight accurately. To alleviate this issue, this paper focuses on predicting wireless fingerprinting location uncertainty by given received signal strength (RSS) measurements through the use of machine learning (ML). Two ML methods are used, including an artificial neural network (ANN)-based approach and a Gaussian distribution (GD)-based method. The predicted location uncertainty is evaluated and further used to set the measurement noises in the dead-reckoning/wireless fingerprinting integrated localization extended Kalman filter (EKF). Indoor walking test results indicated the possibility of predicting the wireless fingerprinting uncertainty through ANN the effectiveness of setting measurement noises adaptively in the integrated localization EKF.
15 March 2019 in IEEE Transactions on Instrumentation and Measurement
The calibration of low-cost inertial sensors has become increasingly important over the last couple of decades, especially when dealing with sensor stochastic errors. This procedure is commonly performed on a single error measurement from an inertial sensor taken over a certain amount of time, although it is extremely frequent for different replicates to be taken for the same sensor, thereby delivering important information which is often left unused. In order to address the latter problem, this paper presents a general wavelet variance-based framework for multisignal inertial sensor calibration, which can improve the modeling and model selection procedures of sensor stochastic errors using all replicates from a calibration procedure and allows to understand the properties, such as stationarity, of these stochastic errors. The applications using microelectromechanical system inertial measurement units confirm the importance of this new framework, and a new graphical user interface makes these tools available to the general user. The latter is developed based on an R package called mgmwm and allows the user to select a type of sensor for which different replicates are available and to easily make use of the approaches presented in this paper in order to carry out the appropriate calibration procedure.
This paper aims at investigating and analyzing the behavior of Micro-Electromechanical Systems (MEMS) inertial sensors stochastic errors in both static and varying dynamic conditions using two...
Inertial sensor calibration plays a progressively important role in many areas of research among which navigation engineering. By performing this task accurately, it is possible to significantly increase general navigation performance by correctly filtering out the deterministic and stochastic measurement errors that characterize such devices. While different techniques are available to model and remove the deterministic errors, there has been considerable research over the past years with respect to modelling the stochastic errors which have complex structures. In order to do the latter, different replicates of these error signals are collected and a model is identified and estimated based on one of these replicates. While this procedure has allowed to improve navigation performance, it has not yet taken advantage of the information coming from all the other replicates collected on the same sensor. However, it has been observed that there is often a change of error behaviour between replicates which can also be explained by different (constant) external conditions under which each replicate was taken. Whatever the reason for the difference between replicates, it appears that the model structure remains the same between replicates but the parameter values vary. Assuming the model structure has been identified, in this work we therefore consider and study the properties of different approaches that allow to combine the information from all replicates considering this phenomenon, confirming their validity both in simulation settings and also when applied to real inertial sensor error signals. By taking into account parameter variation between replicates, this work highlights how these approaches can improve the average navigation precision as well as obtain reliable estimates of the uncertainty of the navigation solution.
High-precision angular-rate measurements in extreme spin environments require systems capable of handling very high rotation rates, rapid startup, and reliable operation under vibration and shock. However, most commercially available gyro-based Inertial Measurement Units (IMUs) provide measurement ranges limited to approximately ±2000°/s, which may be insufficient for high-speed spinning platforms such as spin-stabilized satellites and drilling systems. This work presents the design, implementation, calibration, and validation of a complete Data Acquisition System (DAS) based on the ADXRS649 analog gyroscope, supporting angular rates up to ±20,000°/s. The system integrates a 12-bit ADC within a dsPIC33 microcontroller, high-speed nvSRAM for continuous logging, and firmware enabling sensor self-testing, memory checks, synchronized sampling, and onboard processing. Operating at a configurable sampling frequency of 50 Hz, the proposed system provides approximately 20 min of continuous data recording. Custom hardware, including multilayer PCB design, signal conditioning, power management, a rugged metallic enclosure, and polyurethane potting, enhances mechanical robustness for operation under vibration and shock. Laboratory calibration over the angular-rate range of ±980°/s quantified the gyroscope bias and scale factor, while experimental validation using a high-speed rotary machine demonstrated stable rolling measurements and reliable data integrity at angular rates exceeding 2000°/s. The results demonstrate that the proposed analog gyro-based DAS provides a robust and cost-effective solution for ultra-high-spin applications and future multi-sensor integration.