This work considers the flow field as two-dimensional turbulent flow and studies the steady-state properties of heat transfer and the pressure of the suspension nozzle. An adiabatic wall parallel to the moving wall and two slit entrances at either end of the adiabatic wall make up the rectangular flow field. The SST $$k - \omega$$ turbulence model is used in the turbulence computation. Both qualitative and quantitative analyses are conducted on the distribution of the flow field, temperature field, local Nusselt number, local pressure coefficient, average Nusselt number, and average pressure coefficient under various combination conditions. The findings indicate that when the suspension nozzle's flow field varies greatly, wall-jet velocity ratio is 0.1. A rise in Jet inclination angle is not helpful for the wall's suspension, and it has minimal effect on the flow field. The flow field is greatly influenced by separation space-slit width ratio. Larger separation space-slit width ratio values are advantageous for the wall's heat transmission but unfavorable for the wall's suspension. The flow field is most influenced by wall-jet velocity ratio. The wall's ability to convey heat is stronger the higher the wall-jet velocity ratio, but its ability to support weight falls.
This study investigates the effect of mechanical ball milling with Al2O3 powders on the wear resistance of 440C steel balls. A specially-designed grinding jar was employed for the mechanical ball milling process, allowing for the comparison of samples treated with Al2O3 powders and without Al2O3 powders, as well as the heat-treatment samples. The roughness, microhardness, residue stress, and wear resistance of treated samples were investigated and compared. The results reveal that the addition of Al2O3 powders leads to significant grain refinement, increased dislocation density, and the presence of nano-structured staking faults. The treated samples exhibit a strengthened layer exceeding 200 µm, with maximum microhardness reaching 753 HV and residual stress measuring − 237 MPa. Furthermore, the treated samples demonstrate reduced coefficient of friction, wear volume, and improved wear resistance compared to the other samples. These findings highlight the efficiency of mechanical ball milling with Al2O3 powders in enhancing the wear resistance of ball mechanical components, thereby offering potential benefits for industrial applications.
The drying process of the lithium battery pole pieces makes extensive use of the suspension nozzle. It is of great significance to study the heat transfer and pressure steady-state characteristics of the suspension nozzle and to select the appropriate nozzle structure for the production of pole pieces. Based on the \({\text{SST }}k - \omega\) turbulence model, this article numerically simulates the impact jet process of suspension nozzles with slits, injection holes, and effusion holes. There is a qualitative and quantitative analysis of the distribution of their velocity field, temperature field, local Nusselt number, average Nusselt number, local pressure coefficient, and average pressure coefficient, and the comprehensive performance index of the nozzle is proposed. The results show that when the weight factor of heat transfer performance α is less than 21.61% and the weight factor of pressure performance β is more than 78.39%, the comprehensive performance of the traditional suspension nozzle with double slits is the best. As the α is increasing, the β is decreasing. The comprehensive performance of the suspension nozzle with effusion holes is the best. The turbulent intermittence, interaction between neighbouring jets, and edge effects affect the heat transfer and pressure uniformity of the suspension nozzle.