A comprehensive study has been conducted on the cathodic electrodeposition of ZnO/eosinY hybrid thin films from aqueous mixed solutions containing Zn(NO3)2 and eosinY, as well as their photoelectrochemical characteristics. Adsorption of eosinY molecules on the growing surface of ZnO leads to the automatic formation of a nano-porous hybrid structure consisting of interconnected nano-sized ZnO crystals. The dye molecules are loaded into the film at a very high amount as orderly packed layer, being chemically attached to the internal surface of ZnO through their carboxylic acid group, and a major part of them could be desorbed by alkaline treatment without dissolving ZnO. Under the conditions of film preparation, electrochemical reduction of an eosinY molecule coupled with stable complex formation with a Zn2+ ion has been observed and is supposed to play a key role in the process of “self-assembly” of the three dimensional ZnO/eosinY hybrid structures. The electrodeposited ZnO/eosinY hybrid thin films exhibit a high performance as sensitized photoelectrodes. Intensity modulated photocurrent and photovoltage spectroscopies have shown a fast diffusion and a long lifetime of electrons injected from photoexcited eosinY into the conduction band of ZnO, indicating an almost barrier-free transport in the porous network of ZnO grown from solution. A high incident photon to current conversion efficiency of 47% was obtained in the absorption maximum of the loaded dye following a mild heat treatment of the film at 150°C, making the present material applicable to conductive plastic substrates for realization of flexible dye-sensitized solar cells.
A novel near-infrared-absorbing heptamethine–cyanine dye (KFH-3) that contains four n-butyl groups was synthesized for use in highly efficient dye-sensitized solar cells with porous zinc oxide (ZnO) prepared at low temperature, and resulted in remarkable performance characteristics, such as a conversion efficiency of 1.23% (AM 1.5) with an incident photon-to-current conversion efficiency (800 nm) of 33%, a short-circuit photocurrent density of 3.34 mA, an open-circuit photovoltage of 0.49, and a fill factor of 0.76, using almost solely the near-infrared region of sunlight.