The study is aimed at designing a system which ensures dock mobility (moving from the quay to the dock trench) and stabilises the dock in position during docking operations. A number of requirements and design criteria have been defined for the dock moving system, the most important of them being its capability to support docking operations at a maximum wind force of 5 °B, and environmental friendliness (zero exhaust fumes or other pollutants). As part of the research, concepts for various dock moving systems have been developed, including calculations of technical and operational parameters. Each concept has been analysed for meeting the defined requirements and design criteria. Ultimately, a system which meets all of the requirements and criteria and is completely environmentally friendly has been selected for construction. The authors discuss the entire process of creating system concepts, parameter calculations, and assessment of fulfilment of the requirements and design criteria. The principle of operation and the design of the system have been explained. The dock is powered by electricity stored in batteries and generated from renewable energy sources.
Environmental protection is one of the most challenging tasks facing mankind. Reducing CO2 emissions in the global economy, including maritime transport, is being pursued in various ways, one of them being the design work leading to the construction and operation of unmanned ships. Unmanned vessels operating on longer routes will still have internal combustion propulsion. However, they will not have the superstructure and the various systems and equipment necessary for the crew. This will result in an unmanned vessel having less weight, less displacement and, therefore, less size, resistance and propulsion power than a manned vessel for the same transport capacity. Consequently, the unmanned vessel will emit less CO2. This paper presents a novel method for predicting fuel consumption and CO2 emissions for unmanned container ships. The method uses regression relationships of geometric and operational parameters for manned container ships developed for this purpose to determine such relationships for unmanned ships. On this basis, it is shown what the level of CO2 reduction will be compared to manned container ships.
For the correct execution of the preliminary design of a transport ship, among other things, approximate formulas enabling the calculation of the weight of the unladen ship and the location of the center of gravity are necessary. The aim of the conducted research was to develop approximate formulas for calculating the weight and center of gravity of an empty container ship with a size ranging from 270 TEU to 3100 TEU, depending on the basic design parameters: ship speed V, deadweight DWT, and number of TEU containers. Since the weight of an unladen container ship has a very large impact on the ship’s operating parameters, an additional aim was to obtain regression formulas with greater accuracy than similar formulas published in the literature. Simple and multiple regression methods were used to develop regression formulas. The obtained results were verified on the basis of experimentally measured parameters obtained from built ships. The regression formulas presented in this article are characterized by high accuracy, greater than that of similar formulas published in the literature, and were developed for container ships currently under construction. A novelty of this study is the development of regression formulas for weight classes, which make up the total weight of an unladen ship.
This research study aims to develop a system which ensures the mobility of a floating dock and its stability in position during docking operations. The dock is designed for operation in a river canal. In order to dock a ship, it is moved away from the quay over a dock trench. Initial requirements and design criteria for the system were determined. The most important of them include docking in the maximum weather conditions, corresponding to a wind speed of 5° Beaufort (5°B), and a zero-emission target for the power supply system (use of a renewable energy source). A wire and winch system was designed to move the dock and stabilise it in position during docking operations. The system comprises mooring wires which are tied to bollards on both quays, and wire winches mounted on both sides of the dock. The wire winches are hydraulically driven, and the hydraulic pumps, run by electric motors, are powered with batteries charged using photovoltaic panels. Statistical environmental parameters (wind, river current) were analysed and the probability of certain mooring wire loads and the corresponding wire winch power output were quantified. Based on these calculations, the power of photovoltaic panels and capacity of the batteries required to power the dock moving system were determined. This paper discusses the system design as well as the results of trials.