Hydrophobic coatings have potential applications in various fields, including for corrosion and weathering protection. In this study, we investigated the use of organopolysilazanes (OPSZs) combined with hydrophobic nanoparticles (NPs) on steel as a substrate to obtain hydrophobic coatings. The coatings were characterized using various techniques, and their hydrophobic properties and corrosion and weathering resistance were evaluated under near-shore marine conditions with high salinity, humidity and UV radiation. Our results show that the coatings exhibited excellent hydrophobic properties and significantly improved corrosion and weathering resistance compared to an uncoated steel and a pristine polymer. These findings suggest that the developed coatings have the potential to provide protection against corrosion for atmospheric and splash exposures in marine environments.
28 January 2020 in Acta crystallographica Section B, Structural science, crystal engineering and materials
The structures ofxSrO–(100 −x)TeO2(x= 5, 7.5, 8.5 and 10 mol.%) glass, anti-glass and crystalline samples were studied by high-energy X-ray diffraction (HEXRD), reverse Monte Carlo (RMC) simulations, atomic pair distribution function analysis andFullprofRietveld refinement. The atomic pair distributions show the first peak at 1.90 Å due to the Te—O equatorial bonds and the Te—O peak is asymmetrical due to the range of Te—O bond lengths in glass, anti-glass and crystalline samples. The short-range structural properties of glasses such as Te—O bond lengths, Te–O speciation, Te–Te distances and O—Te—O bond angle distributions were determined by RMC simulations. The average Te–O coordination number (NTe–O) for 5SrO–95TeO2glass is 3.93 which decreases to 3.59 on increasing the SrO concentration to 10 mol.%. The changes inNTe–Orevealed that the glass network predominantly contains TeO4units with a small amount of TeO3units and there is a structural transformation TeO4→ TeO3with an increase in SrO concentration. The O—Te—O bond angle distributions have a peak at 79° and reveal that the Oequatorial—Te—Oequatorialbonds are the most abundant linkages in the tellurite network. Two glass samples containing 7.5 and 8.5 mol.% of SrO were annealed at 350°C for 1 h to produce anti-glass phases; they were further annealed at 450°C for 4 h to transform them into crystalline phases. The anti-glass samples are disordered cubic SrTe5O11and the disordered monoclinic SrTeO3phases, whereas the crystalline samples contain monoclinic SrTeO3and the orthorhombic TeO2phases. The unit-cell parameters of the anti-glass and crystalline structures were determined byFullprofRietveld refinement. Thermal studies found that the glass transition temperature increases with an increase in SrO mol.% and the results on the short-range structure of glasses from Raman spectroscopy are in agreement with the RMC findings.
Carbonaceous materials used in most electrochemical applications require high specific surface area, adequate pore size distribution, and high electrical conductivity to ensure good interaction with the electrolyte and fast electron transport. The development of transition metal doped graphene aerogels is a possible solution, since their structure, morphology, and electrical properties can be controlled during the synthesis process. This work aims to synthesize Ni-doped graphene aerogels to study the role of different nickel salts in the sol-gel reaction and their final properties. The characterization data show that, regardless of the nature of the Ni salts, the surface area, volume of micropores, and enveloped density decrease, while the porosity and electrical conductivity increase. However, differences in morphology, mesopore size distribution, degree of order of the carbon structure, and electrical conductivity were observed depending on the type of Ni salt. It was found that nickel nitrate results in a material with a broader mesopore distribution, higher electrical conductivity, and hence, higher electrochemical surface area, demonstrating that graphene aerogels can be easily synthesized with tailored properties to fit the requirements of specific electrochemical applications.
This work evaluates the CO2-adsorption relevance and cycling stability of graphene oxide–silica (GO-SiO2) and reduced graphene oxide–silica (rGO-SiO2) gels after amine functionalization, demonstrating high-capacity retention under repeated adsorption–desorption cycles: rGO-SiO2-APTMS retains ≈96.3% of its initial uptake after 50 cycles, while GO-SiO2-APTMS retains ≈90.0%. The use of surfactants to control the organization of inorganic and organic molecules has enabled the development of ordered mesostructures, such as mesoporous silica and organic/inorganic nanocomposites. Owing to the outstanding properties of graphene and its derivatives, synthesizing mesostructures intercalated between graphene sheets offers nanocomposites with novel morphologies and enhanced functionalities. In this study, GO-SiO2 and rGO-SiO2 gels were synthesized and characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TG), mass spectrometry (MS), N2 adsorption–desorption isotherms, and transmission electron microscopy (TEM). The resulting materials exhibit a laminar architecture, with mesoporous silica domains grown between graphene-based layers; the silica contents are 83.6% and 87.6%, and the specific surface areas reach 446 and 710 m2·g−1, respectively. The laminar architecture is retained regardless of the surfactant-removal route; however, in GO-SiO2 obtained by solvent extraction, a fraction of the surfactant remains partially trapped. Together with their high surface area, hierarchical porosity, and amenability to surface functionalization, these features establish amine-grafted graphene–silica gels, particularly rGO-SiO2-APTMS, as promising CO2-capture adsorbents.