Silver nanowire (Ag NW) networks have attracted wide attention as transparent electrodes for emerging flexible optoelectronics. However, the sheet resistance is greatly limited by large wire-to-wire contact resistances. Here, we propose a simple sunlight illumination approach to remarkably improve their electrical conductivity without any significant degradation of the light transmittance. Because the power density is extremely low (0.1 W/cm2, 1-Sun), only slight welding between Ag NWs has been observed. Despite this, a sheet resistance of <20 Ω/sq and transmittance of ~87% at wavelength of 550 nm as well as excellent mechanical flexibility have still been achieved for Ag NW networks after sunlight illumination for 1 hour or longer, which are significant upgrades over those of ITO. Slight plasmonic welding together with the associated self-limiting effect has been investigated by numerical simulations and further verified experimentally through varied solar concentrations. Due to the reduced resistance, high-performance transparent film heaters as well as efficient defrosters have been demonstrated, which are superior to the previously-reported Ag NW based film heaters. Since the sunlight is environmentally friendly and easily available, sophisticated or expensive facilities are not necessary. Our findings are particularly meaningful and show enormous potential for outdoor applications.
Gold absorbers based on plasmonic tapered coaxial holes (PTCHs) are demonstrated theoretically and experimentally. An average absorption of over 0.93 is obtained theoretically in a broad wavelength range from 300 nm to 900 nm without polarization sensitivity due to the structural symmetry. Strong scattering of the incident light by the tapered coaxial holes is the main reason for the high absorption in the short wavelength range below about 550 nm, while gap surface plasmon polaritons propagating along the taper dominate the resonance-induced high absorption in the long wavelength range. Combining two PTCHs with different structural parameters can further enhance the absorption and thus increase the spectral bandwidth, which is verified by a sample fabricated by focused ion beam milling. This design is promising to be extended to other metals to realize effective and efficient light harvesting and absorption.
Optical metasurfaces hold great potential for near-eye display applications with high optical efficiency, light-weight and compactness. Taking advantage of optical resonances in subwavelength features, metasurfaces can diffract optical beams at RGB primary colors efficiently, forming superimposed virtual images over a real-world scene with merely a single glass substrate in augmented realities (AR) applications. We report for the first time a metasurface with double or triple nano-beams in each period for high angle diffraction with a uniform efficiency at RGB wavelengths. An efficiency as high as 30-40% of the first diffraction order is obtained across field of view, allowing a single piece of AR glass for light in-coupling to deliver image uniformly. The underlying physics is investigated through systematic full-vector numerical simulations. It is found that strong resonances inside the nano-beams with different sizes are the main reason for the deflection of wavefront as well as the Poynting vectors, leading to an efficient coupling of the incident light into the first-order diffraction. The resonances also manipulate the light absorption among the RGB colors for uniform efficiency. This work provides a new understanding of optimal metasurface structure for waveguide couplers using multiple nano-beams.
We have proposed a full-solution polymethylmethacrylate (PMMA)-assisted spin-coating method for uniformly distributing silver nanowires, which are carried in PMMA, on both rigid and flexible substrates as transparent electrodes. High optical transmittance (~0.91, much better than that of a 80 nm thick ITO that is typically applied to solar cells), good electrical conductivity (~15 Ω/sq on average, comparable to that of ITO) and long-term stability have been demonstrated for the devices on 4” glass substrates, which are also better than the devices fabricated without the assistance of PMMA. The mechanism is presented through systematic investigation of the effects of two key processing parameters, i.e., the volume ratio of the Ag NWs in ethanol to the PMMA, and the second rotary speed of the spin-coating process. This method has been extended to flexible substrates. Good uniformity is also achieved over a large area of 5 cm × 5 cm. A simple application demonstration indicates again the great potential of our method for mass production of Ag NW networks, which are likely to replace ITO as transparent electrodes.