The building sector is one of the largest energy consumers in the world, comprising about 40% of the total energy consumption in numerous countries. Early design decisions have a significant impact on the energy performance of buildings. The paper presents the multi-variable optimization of the selected design parameters in a single-family building in temperate climate conditions. The influence of four types of windows, their size, building orientation, insulation of external wall, roof and ground floor and infiltration on the life cycle costs (LCC) is analyzed. Optimal selection of the design parameters is carried out using genetic algorithms by coupling the building performance simulation program EnergyPlus with optimization environment. The simulations were conducted for seven optimization cases. The analysis is performed for two variants of a building with heating and cooling systems and with a heating system only. Depending on the analyzed case, the life cycle costs decreased from 7% to 34% LCC value of the reference building. In the case of temperate climate, the building optimization (in terms of heat demand only) substantially reduces the heating costs, yet the summer thermal comfort conditions deteriorate significantly.

A properly designed house should provide occupants with the high level of thermal comfort at low energy demand. On many occasions investors choose to add additional insulation to the buildings to reduce heat demand. This may lead to overheating of the building without a cooling system in summer periods (these prevail in Poland). Additionally, it affects the deterioration of thermal comfort, which can only be improved by increasing ventilation. The paper presents the multi-objective optimization of the selected design parameters in a single-family building in temperate climate conditions. The influence of four types of windows, their size, building orientation, insulation of external wall, roof and ground floor and infiltration on the life cycle costs and thermal comfort is analyzed for the building without cooling. Infiltration changes during the simulation and is controlled by a special controller. Its task is to imitate the behavior of occupants in changing the supply airflow. Optimal selection of the design parameters is carried out using Non-dominated Sorting Genetic Algorithm II (NSGA-II) by coupling the building performance simulation program EnergyPlus with optimization environment. For the single-family house, optimal values of design variables for three different criteria are presented.

This paper presents a comparative analysis of the carbon footprint, energy demand and life cycle costs of a model of a building located in the Central Europe climate zone. One specific example—the quantitative differences in global warming potential, life cycle costs and thermal comfort—has been shown, depending on the different construction (wood, brick) and heat sources used; traditional and energy-saving solutions have been considered. The research was carried out using the EnergyPlus simulation program for a multi-zone model of a naturally ventilated single-family house. Calculations were made for a 25-year life cycle using the standard climate data for Warsaw (Poland). The real occupancy schedule of the individual rooms was adopted and the instantaneous ventilation airflow was modeled, and its intensification due to the additional opening of windows was optimized. An estimated budget of the entire structure of the building and the heat sources was used for the cost analysis. The research has succeeded in developing some general conclusions and guidelines and recommendations for both the investors and designers of energy-saving and environmentally friendly houses. Considering the most economical an ecological solution, wooden houses are better than brick houses. In the wooden building, however, there are a larger number of thermal discomfort hours.