The effect of hollow aluminosilicate microspheres on the Payne effect and on physicomechanical, thermal, fire-retardant, and heat-protecting properties of elastomer compounds based on ethylene–propylene–diene rubber was studied. Based on the results obtained, the mechanism of the interaction of the elastomer matrix with the microspheres was suggested. Enhancement of the filler–matrix and filler–filler interaction favors additional three-dimensional cross-linking, which influences the set of the physicomechanical and thermal properties, and manifestation of the reinforcing effect in a coke layer under the conditions of erosion removal and detachment of the material with a high-velocity gas flow.
1 July 2018 in Russian Journal of Applied Chemistry
The influence of carbon microfiber on the physicomechanical, thermophysical, and fireproof characteristics of elastomeric compositions based on ethylene propylene diene rubber is considered....
1 May 2022 in Russian Journal of Applied Chemistry
An organoelement compound based on dicyandiamide and dimethyl phosphite was synthesized. The possibility of using the derived compound as a modifier that increases the fire and heat protection parameters of elastomeric materials was studied, the physical and mechanical properties of vulcanizates based on SKEPT-40 and their resistance to high-temperature effects were determined. The introduction of the synthesized substance was found to influence on the complex of vulcanization, physicomechanical, thermophysical and fire and heat protective properties of rubbers based on ethylene propylene diene rubber.
The influence of hollow aluminosilicate microspheres on the efficiency of elastomeric thermoprotective materials based on ethylene—propylene rubber is considered. The introduction of hollow...
1 May 2017 in Russian Journal of Applied Chemistry
The effect of kaolin fibers on the physicomechanical, thermal, and fire-and-heat-protective characteristics of elastomeric composites based on ethylene-propylene-diene caoutchouc is considered. The microfiber kaolin filler favors manifestation of the microreinforcement effect, which enhances the heat-protective properties of the material due to the higher mechanical strength of the coke.
The paper is devoted to the development of a new phosphorus–nitrogen-containing fire retardant with multifunctional action, which is a product of the interaction of dimethylphosphite and dicyandiamide (DDP). The resulting product has a close-to-optimal ratio of nitrogen and phosphorus atoms, which determines its adhesive, thermal stabilizing, and antipyretic activity. DDP has a positive effect on the fire- and heat-protective properties of the material: the time for heating the unheated surface of the sample to 100°C increases by 39–57%, and the linear burning rate decreases by 17–21%. It has been shown that the strength of the adhesive joint increases by an average of 30–70% and the composition containing DDP exhibits consistently better adhesive strength than the original adhesive composition up to 80°C.