Recently, the crystal structure of violet phosphorus and its monolayer violet phosphorene (VP) have been reconfirmed experimentally, and they were verified to be more thermally stable than their allotrope, black phosphorus. Here, we calculated the carrier mobility of monolayer VP using density functional theory. It is found that the carrier mobility is highly anisotropic and the hole mobility reaches 9.86 × 103 cm2 V−1 s−1 in the a-direction, endowing the potential application of VP in p-type semiconductor channel materials. Moreover, the Schottky barrier of the graphene/VP heterojunction turns into an ohmic contact when the electric field strength is >2 V nm−1. Therefore, VP and graphene/VP heterojunctions have potential prospects in electronic devices.
In this work, we focus on the degradation of membrane electrode assemblies (MEAs) in proton-exchange membrane water electrolysis (PEMWE) induced by different accelerated stress tests (ASTs), including constant-current mode, square-wave mode, and solar photovoltaic mode. In constant-current mode, at continuous testing for 600 h at 80 °C, a degradation of operating voltage increased by the enhanced current density from 22 µV/h (1 A/cm2) to 50 µV/h (3 A/cm2). In square-wave mode, we found that in the narrow fluctuation range (1–2 A/cm2), the shorter step time (2 s) generates a higher degradation rate of operating voltage, but in the wide fluctuation range (1–3 A/cm2), the longer step time (22 s) induces a faster operating voltage rise. In the solar photovoltaic mode, we used a simulation of 11 h sunshine duration containing multiple constant-current and square-wave modes, which is closest to the actual application environment. Over 1400 h ASTs, the solar photovoltaic mode lead to the most serious voltage rise of 87.7 µV/h. These results are beneficial to understanding the durability of the PEM electrolyzer and optimizing the components of MEAs, such as catalysts, membranes, and gas diffusion layers.
18 August 2021 in The Journal of Physical Chemistry C
Thermodynamic immiscibility is a challenge for intermetallic alloying of sub‐5 nm Ru‐based alloys, which are excellent electrochemical catalysts for water splitting. In this study, nanosecond laser ultrafast confined alloying (LUCA) is proposed to break the immiscible‐to‐miscible transition limit in the synthesis of carbon nanotubes (CNTs) supported sub‐5 nm bimetallic RuM (M = Cu, Rh, and Pd) alloy nanoparticles (NPs). The alloying of non‐noble metal Cu with varying atomic ratios of RuCu alloys is appealing owing to the low price of Cu and cost‐effective synthesis for large‐scale practical applications. Benefiting from the synergistic alloying effect and resultant H/OH binding energy alteration, the Ru95Cu5/CNTs catalysts display excellent electrocatalytic alkaline hydrogen evolution reaction (HER) activity with an overpotential of 17 mV and Tafel slope of 28.4 mV dec−1 at 10 mA cm−2, and high robustness over long‐term 5000 cyclic voltammetry cycles. The performance is much better than LUCA‐synthesized CNTs‐supported Ru86Rh14, Ru89Pd11, Ru, and Cu NPs catalysts, commercial benchmark 20% Pt/C, and other mainstream Ru‐based catalysts including wet chemistry‐synthesized RuRh particles (overpotential of 25 mV, Tafel slope of 47.5 mVdec−1) and RuCu/CNTs (overpotential of 39 mV) synthesized using the flash Joule heating method, indicating the great potential of LUCA for screening new classes of HER catalysts.
Hydrogen generation by photocatalytic water splitting has drawn enormous research attention for converting sunlight and water into clean and green hydrogen fuel. However, the search for a high efficiency photocatalyst for water splitting is a key challenge. Two dimensional (2D) van der Waals (vdW) heterostructures as photocatalysts exhibit many advantages over the stacked original materials. In this article, we designed two novel 2D vdW heterostructures composed of WSSe and blue phosphorene (BP) monolayers, SWSe-BP and SeWS-BP, which are thermodynamically stable at room temperature. Using first-principles calculations, we found that the SWSe-BP vdW heterostructure can act as a potential photocatalyst for water splitting due to its robust stabilities, type-II band alignment, moderate bandgap, and suitable band edge positions for the redox reactions of water splitting, strong optical absorption, and excellent power conversion efficiency (PCE). Remarkably, the PCE of the SWSe-BP vdW heterostructure can achieve approximately 19.4% under a 3% biaxial tensile strain.