Silicon and silicon-based materials are essential to our daily life. They are widely used in healthcare and manufacturing. However, silicon and silicon-based materials are susceptible to bio-fouling, which is of great concern in numerous applications. To date, interdisciplinary research in surface science, polymer science, biology, and engineering has led to the implementation of antifouling strategies for silicon-based materials. However, a review to discuss those antifouling strategies for silicon-based materials is lacking. In this article, we summarized two major approaches involving the functionalization of silicon and silicon-based materials with molecules exhibiting antifouling properties, and the fabrication of silicon-based materials with nano- or micro-structures. Both approaches lead to a significant reduction in bio-fouling. We critically reviewed the designs that prevent fouling due to proteins, bacteria, and marine organisms on silicon and silicon-based materials.

Silk sericin (SS) produced by Bombyx mori is normally discarded as waste in manufacturing processes, which causes environmental pollution. Therefore, investigating the use of silk sericin has economic and environmental benefits. As a three-dimensional structure, the sericin-derived hydrogel was explored in different applications. However, many developed gelation procedures raise concerns regarding safety, cost, and duration of gelation time. In this work, “thiol-ene” click chemistry was used to quickly and controllably prepare an SS-derived hydrogel to resolve these early concerns. Then, berberine was loaded and used as a model for investigating the drug-release profiles of the prepared hydrogel. The experimental results revealed that this hydrogel is eligible for a long-term release of berberine. Throughout the antibacterial experiments, the released berberine maintained its antibacterial activity. Our work expands the application of SS in biomedical industries in an eco-friendly way. Furthermore, the discussed strategy could provide a reference for the subsequent development of SS-derived materials.

The abuse and irrational use of tetracyclines (TCs) in human medicine and animal husbandry has become a serious concern, affecting the ecological environment and human health. The aim of this study was to develop a sensitive and selective method using fully automatic solid-phase extraction coupled with ultra-performance liquid chromatography–tandem mass spectrometry for the determination of twelve TCs in water. Four isotope-labeled internal standards for TCs were used to correct matrix effects. Several parameters affecting extraction efficiency were systematically optimized, and the optimum experimental conditions found were 1.0 L water sample with 0.5 g/L Na₂EDTA (pH 3.0) extracted and enriched by CNW HLB cartridge and eluted by 4 mL of acetone:methanol (v/v, 1:1). The enrichment factors were up to 798−1059 but only requiring about 60 min per six samples. Under the optimized conditions, the linearity of the method ranged from 0.2 to 100 μg/L for 12 TCs, the detection limits were as low as 0.01−0.15 ng/L, and the recoveries were in the range of 70%–118%, with relative standard deviations less than 15%. The developed method can be successfully utilized for the determination of 12 TCs in pure water, tap water, river water, and mariculture seawater. In summary, three and six TCs were detected in river water and mariculture seawater, respectively, with total concentrations of 0.074–0.520 ng/L (mean 0.248 ng/L) and 0.792–58.369 ng/L (12.629 ng/L), respectively. Tetracycline (TC) and oxytetracycline (OTC) were the dominant TCs in river water, while doxytetracycline (DXC) and OTC were dominant in mariculture seawater.