International interest in using waste-to-energy (WtE) technology toward a circular economy (CE) is developing, spurred by environmental challenges such as inefficient solid waste dumping, pollution, and resource depletion. Incineration, pyrolysis, gasification, landfill, and anaerobic digestion are standard WtE technologies. Although these methods have been used for many decades, all countries try to implement the best plans based on their technologies and capacities. Therefore, an up-to-date comprehensive study is needed to evaluate the existing barriers to draw a logical roadmap for WtE to CE. Therefore, this review addresses the recent policies adopted by developed and developing countries for WtE technologies. Based on the findings, most countries seek the most cost-effective and environmentally sustainable pathways in WtE to CE; meanwhile, international collaboration and governmental support are needed to overcome the existing barriers and find a sustainable and economically viable plan for both developed and developing countries in the future.

In recent years, nanomaterials have gained special attention for removing contaminants from wastewater. Nanoparticles (NPs), such as carbon-based materials and metal oxides, exhibit exceptional adsorption capacity and antimicrobial properties for wastewater treatment. Their unique properties, including reactivity, high surface area, and tunable surface functionalities, make them highly effective adsorbents. They can remove contaminants such as organics, inorganics, pharmaceuticals, medicine, and dyes by adsorption mechanisms. In this review, the effectiveness of different types of carbon-based NPs, including carbon nanotubes (CNTs), graphene-based nanoparticles (GNPs), carbon quantum dots (CQDs), carbon nanofibers (CNFs), and carbon nanospheres (CNSs), and metal oxides, including copper oxide (CuO), zinc oxide (ZnO), iron oxide (Fe₂O₃), titanium oxide (TiO₂), and silver oxide (Ag₂O), in the removal of different contaminants from wastewater has been comprehensively evaluated. In addition, their synthesis methods, such as physical, chemical, and biological, have been described. Based on the findings, CNPs can remove 75 to 90% of pollutants within two hours, while MONPs can remove 60% to 99% of dye in 150 min, except iron oxide NPs. For future studies, the integration of NPs into existing treatment systems and the development of novel nanomaterials are recommended. Hence, the potential of NPs is promising, but challenges related to their environmental impact and their toxicity must be considered.

In this study, a novel biomass adsorbent based on activated carbon incorporated with sulfur-based binary metal oxides layered nanoparticles (SML-AC), including sulfur (S₂), manganese (Mn), and tin (Sn) oxide synthesized via the solvothermal method. The newly synthesized SML-AC was studied using FTIR, FESEM, EDX, and BET to determine its functional groups, surface morphology, and elemental composition. Hence, the BET was performed with an appropriate specific surface area for raw AC (356 m²·g⁻¹) and modified AC-SML (195 m²·g⁻¹). To prepare water samples for ICP-OES analysis, the suggested nanocomposite was used as an efficient adsorbent to remove lead (Pb²⁺), cadmium (Cd²⁺), chromium (Cr³⁺), and vanadium (V⁵⁺) from oil-rich regions. As the chemical structure of metal ions is influenced by solution pH, this parameter was considered experimentally, and pH 4, dosage 50 mg, and time 120 min were found to be the best with high capacity for all adsorbates. At different experimental conditions, the AC-SML provided a satisfactory adsorption capacity of 37.03–90.09 mg·g⁻¹ for Cd²⁺, Pb²⁺, Cr^3+, and V⁵⁺ ions. The adsorption experiment was explored, and the method was fitted with the Langmuir model (R² = 0.99) as compared to the Freundlich model (R² = 0.91). The kinetic models and free energy (<0.45 KJ·mol⁻¹) parameters demonstrated that the adsorption rate is limited with pseudo-second order (R² = 0.99) under the physical adsorption mechanism, respectively. Finally, the study demonstrated that the AC-SML nanocomposite is recyclable at least five times in the continuous adsorption–desorption of metal ions.