Zhixiang Wang

Zhixiang Wang


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 March 2023 in Minerals
Verified
Journal Article
Open access
PDF file
YLYang Li
Yang Li
ZPZhonghui Peng
Zhonghui Peng
ZWZhixiang Wang
Zhixiang Wang
YZYongze Zhu
Yongze Zhu
KXKeqiang Xie
Keqiang Xie
In this study, a clean pellet production method of calcium roasting and sulfuric acid leaching of vanadium from vanadium and titanium magnetite concentrates is proposed, which can effectively separate vanadium and iron, and the pellets after acid leaching and vanadium extraction can be used as raw material for iron making after secondary roasting. During the experiment, only 2% Ca(OH)2 was added as the calcifier to make pellets, and vanadium was extracted by acid leaching after calcination. Under the optimum conditions, the vanadium leaching rate was 74.51%, and the iron leaching rate was only 1.05%. After secondary roasting, the compressive strength of the pellets was 2358 N, and the qualification rate was 97%. Additionally, after acid leaching and vanadium extraction, the impurities in the pellet were partially removed, and the iron content of the pellet increased by 6.6%, which is more conducive to subsequent ironmaking. The roasting and acid leaching experiments show that based on the production of iron smelting pellets, the use of pellets can better extract vanadium from the titanium magnetite concentrate, while avoiding the problems of excessive additives to reduce the iron grade of pellets. Or the pursuit of high vanadium extraction rate pellets, which can be seriously damaged and difficult to use later. This process can perform a comprehensive utilization of vanadium titanium magnetite, and has certain guiding significance for industrial production.

16 June 2023 in Metals
Verified
Journal Article
Open access
PDF file
ZPZhonghui Peng
Zhonghui Peng
ZWZhixiang Wang
Zhixiang Wang
ZHZhongchen Han
Zhongchen Han
YZYongze Zhu
Yongze Zhu
YLYang Li
Yang Li
KXKeqiang Xie
Keqiang Xie
This paper investigated a pellet ore production process in which vanadium was extracted from vanadium and titanium magnetite concentrates using sulfuric acid leaching. Calcium and magnesium were added to the iron ore concentrate during pellet production to produce calcium vanadate and magnesium vanadate after roasting. The pellets were leached with sulfuric acid solution to extract V5+. The resulting pellets had a compressive strength of 3375 N after primary roasting, a good pellet morphology after acid leaching, and simple liquid–solid separation. Under the optimal experimental conditions, the vanadium leaching rate in the pellets reached 77.86%, while the iron leaching rate was only 1.17%. The pellets did not fragment, which was an improvement upon existing vanadium extraction methods. The strength of the pellets after vanadium extraction decreased to 563 N, but after secondary roasting, the compressive strength of the pellets reached 2578 N, which was suitable for blast furnace ironmaking. The roasting and acid leaching experiments showed that the vanadium extraction process resulted in suitable pellet properties. The use of low compound additives can effectively improve the leaching effect, while avoiding the previous problems of too many additives, pellet iron grade reduction, or the pursuit of high vanadium extraction rate pellet breakage and serious high secondary use process costs.

15 December 2022 in Minerals
Verified
Journal Article
Open access
PDF file
ZPZhonghui Peng
Zhonghui Peng
ZWZhixiang Wang
Zhixiang Wang
YLYang Li
Yang Li
YZYongze Zhu
Yongze Zhu
KXKeqiang Xie
Keqiang Xie
Here, a process for leaching vanadium from calcified roasting pellets (CPVC) of vanadium–titanium-iron concentrate by a two-stage sulfuric acid cycle was proposed. The first stage of leaching was mainly for the removal of silicon from the pellet and leaching solution. After the second stage, the total leaching rates of vanadium and iron were 75.52% and 0.71%, respectively. The concentration of vanadium in the leaching solution reached 6.80 g/L, which can subsequently direct a vanadium precipitation process without extraction and enrichment. After the second roasting, the crushing strength of the pellets reached 2250 N, which met the requirement for blast furnace iron making. The Eh-pH diagrams of the V-Fe-H2O system at different temperatures were plotted. Thermodynamically, it was difficult to selectively leach vanadium and iron by changing the conventional acid leaching conditions. In addition, the pellets before and after leaching were analyzed. The grade of iron in the pellets increased slightly after leaching, and the main phases in the pellets remained as Fe2O3 and Fe9TiO15. The S in the sulfuric acid solution entered the leached pellets during the acid leaching reaction and was removed by the second roasting of the leached pellets.