Herein, we describe the design, implementation and operation principles of an astronomical camera system, based on a large-format CCD261-84 detector with an extremely thick 200 μm substrate. The DINACON-V controller was used with the CCD to achieve high performance and low noise. The CCD system photometric characteristics are presented. A spatial autocorrelation analysis of flat-field images was performed to reveal the dependence of substrate voltage on the lateral charge spreading. The investigation of the dispersion index for the optimal choice of exposure time is discussed. Studies of the patterns of fringes were carried out in comparison with previous detectors. The amplitude of fringes with CCD261-84 was significantly lower, compared to previous-generation detectors. The results of using a new camera for imaging and spectral observations at the Russian 6 m telescope with the SCORPIO-2 multimode focal reducer are considered. The developed CCD camera system makes it possible to significantly increase the sensitivity in the 800–1000 spectral range.
1 December 2000 in Astronomical & Astrophysical Transactions
The principles of the construction of a new CCD camera system with improved performance in readout noise and charge measurement accuracy for the 6 m telescope are described. Digital real-time processing of video signals applied in the system.
Astronomical CCD systems based on second-generation DINACON controllers were developed at the SAO RAS Advanced Design Laboratory more than seven years ago and since then have been in constant operation at the 6-meter and Zeiss-1000 telescopes. Such systems use monolithic large-area CCDs. We describe the software developed for the control of a family of large-area CCD systems equipped with a DINACON-II controller. The software suite serves for acquisition, primary reduction, visualization, and storage of video data, and also for the control, setup, and diagnostics of the CCD system.
Factors distorting the statistics of photocounts when acquiring objects with low fluxes were considered here. Measurements of the Fano factor for existing CCD systems were conducted. The study allows one to conclude on the quality of the CCD video signal processing channel. The optimal strategy for faint object observations was suggested.Comment: 4 pages, 4 figure