Compared to conventional reservoirs, the prediction of pressure in ultra-deep tight sandstone formations is difficult. The prediction of seismic pressure is more challenging than well-logging pressure prediction. The main methods for seismic pressure prediction include the equivalent depth method, Eaton method, Fillippone formula, and modified versions. Among them, the Eaton method is widely used and has good effectiveness. However, this method relies on difficult-to-obtain normal compaction trend lines, which leads to low prediction accuracy in space. To address this issue, a method combining the Eaton method and collocated cokriging is proposed. Herein, the Eaton formula is used to predict formation pressure at the well, with compressional wave velocity as the covariate for predicting the main variable—formation pressure. By simulating the shear wave velocity based on seismic compressional wave velocity, the influence of various parameters on the prediction results is analyzed, and the accuracy of this method is verified by comparing it with other methods. The proposed method is then applied to predict formation pressure in the ultra-deep formations of the Junggar Basin. The simulation results show that the collocated cokriging method achieves higher planar accuracy and better matches the experimental expectations in terms of prediction results. The application results also demonstrate the scientific effectiveness of the combined method, which has achieved good results in practical production applications.
Comparison with conventional reservoirs, the prediction of pressure in ultra-deep tight sandstone formations is difficult. The prediction of seismic pressure is more challenging than well logging pressure prediction. The main methods for seismic pressure prediction include equivalent depth method, Eaton method, Fillippone formula, and its modified versions. Among them, the Eaton method is widely used and has good effectiveness. However, this method relies on difficult-to-obtain normal compaction trend line, which leads to low prediction accuracy in space. To address this issue, a method combining the Eaton method and Collocated cokriging is proposed. The Eaton formula is used to predict formation pressure at the well, with compressional wave velocity as the covariate for predicting the main variable, formation pressure. By simulating the shear wave velocity based on seismic compressional wave velocity, the influence of various parameters on the prediction results is analyzed, and the accuracy of this method is verified by comparing it with other methods. The proposed method is then applied to predict formation pressure in the ultra-deep formations of the Junggar Basin. The simulation results show that the Collocated cokriging method achieves higher planar accuracy and better matches the experimental expectations in terms of prediction results. The application results also demonstrate the scientific effectiveness of the combined method, which has achieved good results in practical production applications.
Efficient and accurate numerical simulation of seismic wave propagation is important in various Geophysical applications such as seismic full waveform inversion (FWI) problem. However, due to the large size of the physical domain and requirement on low numerical dispersion, many existing numerical methods are inefficient for numerical modelling of seismic wave propagation in a heterogeneous media. Despite the great efforts that have been devoted during the past decades, it still remains a challenging task in the development of efficient and accurate finite difference method for the multi-dimensional acoustic wave equation with variable velocity. In this paper, we proposed a Pad\'{e} approximation based finite difference scheme for solving the acoustic wave equation in three-dimensional heterogeneous media. The new method is obtained by combining the Pad\'{e} approximation and a novel algebraic manipulation. The efficiency of the new algorithm is further improved through the Alternative Directional Implicit (ADI) method. The stability of the new algorithm has been theoretically proved by the energy method. The new method is conditionally stable with a better Courant - Friedrichs - Lewy condition (CFL) condition, which has been verified numerically. Extensive numerical examples have been solved, which demonstrated that the new method is accurate, efficient and stable.