Li Shaolong

Dr. Li Shaolong


Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2018 in Royal Society Open Science
Verified
Journal Article
Open access
LSLi Shaolong
Li Shaolong
TSTing Sun
Ting Sun
CLChang Liu
Chang Liu
WYWenfeng Yang
Wenfeng Yang
QTQingru Tang
Qingru Tang
Surface pre-treatment is one of the key processes in bonded repair of aircraft carbon fibre reinforced polymer composites. This paper investigates the surface modification of physical and chemical properties by laser ablation and conventional polish treatment techniques. Surface morphology analysed by laser scanning confocal microscopy and scanning electron microscopy showed that a laser-treated surface displayed higher roughness than that of a polish-treated specimen. The laser-treated laminate exhibited more functional groups in the form of O 1 s/C 1 s atomic ratio of 30.89% for laser-treated and 20.14% for polish-treated as evidenced by X-ray photoelectron spectroscopy observation. Contact angle goniometry demonstrated that laser treatment can provide increased surface free energy and wettability. In the light of mechanical interlocking, molecular bonding and thermodynamics theories on adhesion, laser etching process displayed enhanced bonding performance relative to the polishing surface treatment. These properties resulted in an increased single lap shear strength and a cohesive failure mode for laser etching while an adhesive failure mode occurred in polish-treated specimen.

5 March 2024 in Polymer Composites
Verified
Journal Article
Closed access
LSLi Shaolong
Li Shaolong
WWWenxuan Wang
Wenxuan Wang
LWLin Wang
Lin Wang
ZLZihao Li
Zihao Li
ZTZhan Teng
Zhan Teng
WYWenfeng Yang
Wenfeng Yang

24 October 2024 in Polymer Composites
Verified
Journal Article
Closed access
ZLZihao Li
Zihao Li
YYYikai Yang
Yikai Yang
ZTZhan Teng
Zhan Teng
CZChenyang Zhang
Chenyang Zhang
WYWenfeng Yang
Wenfeng Yang
LSLi Shaolong
Li Shaolong

1 May 2006
Verified
Conference Paper
Closed access
JAJin Aijuan
Jin Aijuan
LHLi Hangtian
Li Hangtian
LSLi Shaolong
Li Shaolong
In this paper, a new three-phase four-wire high-frequency AC link matrix converter is discussed, and the topology of conventional matrix converter is modified with an additional transformer for three-phase four-wire electronic power distribution application. The proposed approach accomplishes high output voltage transfer ratio which is more than unity, galvanic isolation between both voltage sources and higher power density by employing a high-frequency transformer into the intermediate stage of the dual bridge matrix converter. It has a bidirectional power flow capability, controllable input source displacement power factor and lower harmonic distortion on both input and output sides. Furthermore, with three dimensional space vector PWM (3D SVPWM) and modified control strategy, the input and output currents may keep low harmonic distortion under unbalanced input voltage or variable three-phase four-wire unbalanced loads. The proposed approach is a competitive solution to the electronic power transformer. Experimental results of a three-phase four-wire 220/380 V 5 KVA 50 Hz electronic power transformer system based on DSP controller are presented and shown to demonstrate the advantages of the proposed system

30 September 2021 in Journal of Spectroscopy
Verified
Journal Article
Open access
PDF file
WYWenfeng Yang
Wenfeng Yang
ZQZiran Qian
Ziran Qian
YCYu Cao
Yu Cao
YWYongChao Wei
YongChao Wei
CFChanyuan Fu
Chanyuan Fu
LSLi Shaolong
Li Shaolong
Reliability and controllability of selective removal of multiple paint layers from the surface of aircraft skin depend on effective online monitoring technology. An analysis was performed on the multi-pulse laser-induced breakdown spectroscopy (LIBS) on the surface of the aluminum alloy substrate, primer, and topcoat. Based on that, an exploration was conducted on the changes of the characteristic peaks corresponding to the characteristic elements that are contained in the topcoat, primer, and substrate with different layers of a laser action, in combination with analysis of microscopic morphology, composition, and depth of laser multi-pulse pits. The results show that the appearance and increase of the characteristic peak intensity of the Ca I at the wavelength of 422.7 nm can be regarded as the basis for the complete removal of the topcoat; the decrease or disappearance of the characteristic peak intensity can be regarded as the basis for the complete removal of the primer. Al I spectrum at the wavelength of 394.5 nm and 396.2 nm can be adopted to characterize the degree of damage to the aluminum alloy substrate. The feasibility and accuracy of the LIBS technology for the laser selective paint removal process and effect monitoring of aircraft skin were verified. Demonstrating that under the premise of not damaging the substrate, laser-based layered controlled paint removal (LLCPR) from aircraft skin can be achieved by monitoring the spectrum and composition change law of specified wavelength position corresponding tothe characteristic elements that are contained in the specific paint layer.

11 October 2023 in Polymer Composites
Verified
Journal Article
Closed access
LSLi Shaolong
Li Shaolong
LWLin Wang
Lin Wang
WYWenfeng Yang
Wenfeng Yang
WWWenxuan Wang
Wenxuan Wang
DWDisheng Wang
Disheng Wang
ZTZhan Teng
Zhan Teng