Lutfiye Karasaka

Dr. Lutfiye Karasaka

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 July 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
LKLutfiye Karasaka
Lutfiye Karasaka
NUNeslişah Ulutaş
Neslişah Ulutaş
Integrating building information modeling (BIM) technology into historical and cultural heritage structures has resulted in historic building information modeling (H-BIM), an effective method for managing and documenting invaluable historical artifacts. H-BIM has the potential to aid with the design, restoration, and maintenance activities of historical buildings by properly integrating parametric data and deliberately assessing semantic information, thus progressing the 3D model’s performance. H-BIM also aims to conduct cultural heritage (CH) studies in a systematic manner by combining 3D modeling techniques and information management. The first step in this process is to conduct a suitable geomatic survey to build accurate 3D models. The most efficient modeling method is to employ 3D point cloud data that are acquired using the terrestrial laser scanning method. This study proposes a manual modeling strategy for urban historical buildings that falls within the scope of the H-BIM methodology. The proposed modeling strategy follows a workflow that inserts point cloud data into the BIM environment in order to create a 3D urban cultural heritage model using ontologies applied with the H-BIM methodology. With this objective in mind, the H-BIM model development platform Revit was used to model the object elements of the inheritance structure in 3D and save them in the BIM library. It is very important to model building elements separately in 3D modeling studies. The resulting BIM product sheds light on fundamental data for the future planning, design, operation, and maintenance processes of the building. Users can obtain data suitable for H-BIM by adding graphical and non-graphical data.

1 April 2021 in Geomatik
Verified
Journal Article
Closed access
PDF file
LKLutfiye Karasaka
Lutfiye Karasaka
ABAdin Adnan Rashid Beg
Adin Adnan Rashid Beg
Lazer tarama teknolojisi optik-mekanik bir ölçme tekniğidir. Lazer tarama ile obje ve yakın çevresinin çok kısa sürede üç boyutlu konum bilgileri elde edilir. Alıcı ile nesne arasındaki mesafe ise bir elektromanyetik enerji olan lazer ışının seyahat süresi ile belirlenmektedir. Lidar tekonolojisi olarak ifade edilen bu ölçme yöntemi günümüzde farklı platformlarda yersel lazer tarama, mobil lazer tarama ve havadan lazer tarama olarak karşımıza çıkarak mekâna veya nesnelere ait 3B veri ediniminde hızlı ve doğru çözümler sunmaktadır. Günümüzde yersel lazer tarama teknolojisinin; mimari belgeleme, arkeolojik çalışmalar, 3B modelleme, madencilik çalışmaları, deformasyon analizleri, orman envanterlerinin çıkarılması gibi çeşitli mühendislik uygulamalarında kullanılması ile farklı mühendislik problemleri daha kolay çözüme ulaşabilmektedir. Ayrıca lazer tarama teknolojisi karmaşık sahnelerin yoğun nokta bulutları yoluyla hızlı bir şekilde yeniden oluşturulmasını sağlar. Bu anlamda kazaların veya adli suçların meydana geldiği karmaşık sahnelerin hızlı bir şekilde belgelenmesi, olay sonrası analizler için delil teşkil eden bilgilerin tespiti ve bunların sayısal arşivi içinde yersel lazer tarama bu görevi gerçekleştirebilen önemli bir araçtır. Bu çalışmada yersel lazer tarama ile farklı uygulamalar içinde yer alan farklı geometrik özellikteki yapılar modellenmiştir. Verilerin değerlendirilmesinde SCENE, 3DReshaper, JRC 3D Reconstructor yazılımları kullanılmıştır.

22 February 2024 in Ain Shams Engineering Journal
Verified
Journal Article
Open access
ISİbRahim Enes Saglam
İbRahim Enes Saglam
LKLutfiye Karasaka
Lutfiye Karasaka

15 August 2023 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Verified
Journal Article
Open access
PDF file
DAD. Alkan
D. Alkan
LKLutfiye Karasaka
Lutfiye Karasaka
Fires damage nature and living beings. Detection of this damage is important for future. In this study, it was aimed to determine burned areas. For this purpose, Landsat-8 images and U-Net model were used. Python language was preferred. Band combinations 7,5,4; 5,3,7; 5,4,3; 4,3,2; 4,3,2,5 and 2,3,4,5,6,7 have been tried. Train and test processes were carried out separately for each band combination. After the train and test processes were completed, a probability result consisting of values between 0-1 was obtained. Then, a threshold value was used. Thus, binary results consisting of 0 and 1 values were obtained. Three different values were preferred for the threshold: 0.1, 0.5 and 0.9. Thus, the effect of threshold value selection on the test results was examined. The prediction results were evaluated using the masks. For this, general accuracy, recall, precision, F1-score and Jaccard score metrics were used. Recall, precision, and F1-score values were calculated for both burned areas and unburned areas. In addition, minimum, maximum, mean, and standard deviation values were calculated for each metric. When the results are examined, it is seen that the model gives better results when the threshold value is 0.1 and 0.5. Among the band combinations, it is seen that the 7,5,4 combination gave better results than the others. For this band combination, the highest mean accuracy is 0.9743 with the 0.5 threshold value. For this threshold mean recall, mean precision and mean F1-score for burned areas are 0.7203, 0.8411 and 0.7601, respectively. And Jaccard score is 0.6328.

1 March 2023 in Konya Journal of Engineering Sciences
Verified
Journal Article
Open access
PDF file
LKLutfiye Karasaka
Lutfiye Karasaka
Hasan Bilgehan MakineciHasan Bilgehan Makineci
Hasan Bilgehan Makineci
KEKasım ERDAL
Kasım ERDAL
Terrestrial Laser Scanning (TLS) techniques are widely preferred for 3D models of small and large objects, buildings, and historical and cultural heritages. However, sometimes relying on a single method for 3D modelling an object/structure is insufficient to arrive at a solution or meet expectations. For example, Unmanned Aerial Systems (UAS) provide perspective for building roofs, while terrestrial laser scanners provide general information about building facades. In this research, several facades of a selected building could not be modelled using terrestrial laser scanning, and UAS was used to complete the missing data for 3D modelling. The transformation matrix, a linear function, is created to merge different data types. In the transformation matrix, the scale was found to be 1:1.012. The accuracy analysis of the produced 3D model was also made by comparing the spatial measurements taken from different building facades and the differences in the measurement values obtained from the 3D model and calculating statistically. According to the accuracy analysis results, the Root Mean Square Error (RMSE) value is approximately 3 cm. The results of the accuracy research, which are within the 95% confidence interval with the three-sigma rule, are approximately 2 cm as RMSE. As a result of the study, it was determined that the data obtained from UAV photogrammetry and the data obtained by the TLS technique could be combined, and the integrated 3D model obtained can be used more efficiently.

15 December 2021 in Turkish Journal of Geosciences
Verified
Journal Article
Closed access
PDF file
Hasan Bilgehan MakineciHasan Bilgehan Makineci
Hasan Bilgehan Makineci
LKLutfiye Karasaka
Lutfiye Karasaka
The concept of oblique image acquisition entered the literature long after the overhead photogrammetric acquisition techniques. The oblique image acquisition technique is applied to model the edge surfaces of buildings that cannot be obtained with vertical (nadir) image acquisition and eliminate the problems that arise in the orthorectification of high-rise buildings in urban areas. Oblique image acquisition by Unmanned Aerial Vehicles (UAV) independent of aerial photogrammetry is considered possible with unique flight plans. How convenient oblique image acquisition with the help of UAVs is and how it affects the final product is a popular topic studied by researchers. In this study, oblique image acquisition was performed using a rotary-wing UAV (Parrot ANAFI) whose camera can move 180°. With the help of the 3D models obtained, the building was drawn in vector and evaluated to scale. As a result, it has been understood that almost all structural deficiencies in the final products can be eliminated by oblique images. However, it has been revealed that there is still a need for other methods for structures that do not have patterns, such as flat walls.